% Psfig/TeX 
\def\PsfigVersion{1.9}
% dvips version
%
% All psfig/tex software, documentation, and related files
% in this distribution of psfig/tex are 
% Copyright 1987, 1988, 1991 Trevor J. Darrell
%
% Permission is granted for use and non-profit distribution of psfig/tex 
% providing that this notice is clearly maintained. The right to
% distribute any portion of psfig/tex for profit or as part of any commercial
% product is specifically reserved for the author(s) of that portion.
%
% *** Feel free to make local modifications of psfig as you wish,
% *** but DO NOT post any changed or modified versions of ``psfig''
% *** directly to the net. Send them to me and I'll try to incorporate
% *** them into future versions. If you want to take the psfig code 
% *** and make a new program (subject to the copyright above), distribute it, 
% *** (and maintain it) that's fine, just don't call it psfig.
%
% Bugs and improvements to trevor@media.mit.edu.
%
% Thanks to Greg Hager (GDH) and Ned Batchelder for their contributions
% to the original version of this project.
%
% Modified by J. Daniel Smith on 9 October 1990 to accept the
% %%BoundingBox: comment with or without a space after the colon.  Stole
% file reading code from Tom Rokicki's EPSF.TEX file (see below).
%
% More modifications by J. Daniel Smith on 29 March 1991 to allow the
% the included PostScript figure to be rotated.  The amount of
% rotation is specified by the "angle=" parameter of the \psfig command.
%
% Modified by Robert Russell on June 25, 1991 to allow users to specify
% .ps filenames which don't yet exist, provided they explicitly provide
% boundingbox information via the \psfig command. Note: This will only work
% if the "file=" parameter follows all four "bb???=" parameters in the
% command. This is due to the order in which psfig interprets these params.
%
%  3 Jul 1991	JDS	check if file already read in once
%  4 Sep 1991	JDS	fixed incorrect computation of rotated
%			bounding box
% 25 Sep 1991	GVR	expanded synopsis of \psfig
% 14 Oct 1991	JDS	\fbox code from LaTeX so \psdraft works with TeX
%			changed \typeout to \ps@typeout
% 17 Oct 1991	JDS	added \psscalefirst and \psrotatefirst
%

% From: gvr@cs.brown.edu (George V. Reilly)
%
% \psdraft	draws an outline box, but doesn't include the figure
%		in the DVI file.  Useful for previewing.
%
% \psfull	includes the figure in the DVI file (default).
%
% \psscalefirst width= or height= specifies the size of the figure
% 		before rotation.
% \psrotatefirst (default) width= or height= specifies the size of the
% 		 figure after rotation.  Asymetric figures will
% 		 appear to shrink.
%
% \psfigurepath#1	sets the path to search for the figure
%
% \psfig
% usage: \psfig{file=, figure=, height=, width=,
%			bbllx=, bblly=, bburx=, bbury=,
%			rheight=, rwidth=, clip=, angle=, silent=}
%
%	"file" is the filename.  If no path name is specified and the
%		file is not found in the current directory,
%		it will be looked for in directory \psfigurepath.
%	"figure" is a synonym for "file".
%	By default, the width and height of the figure are taken from
%		the BoundingBox of the figure.
%	If "width" is specified, the figure is scaled so that it has
%		the specified width.  Its height changes proportionately.
%	If "height" is specified, the figure is scaled so that it has
%		the specified height.  Its width changes proportionately.
%	If both "width" and "height" are specified, the figure is scaled
%		anamorphically.
%	"bbllx", "bblly", "bburx", and "bbury" control the PostScript
%		BoundingBox.  If these four values are specified
%               *before* the "file" option, the PSFIG will not try to
%               open the PostScript file.
%	"rheight" and "rwidth" are the reserved height and width
%		of the figure, i.e., how big TeX actually thinks
%		the figure is.  They default to "width" and "height".
%	The "clip" option ensures that no portion of the figure will
%		appear outside its BoundingBox.  "clip=" is a switch and
%		takes no value, but the `=' must be present.
%	The "angle" option specifies the angle of rotation (degrees, ccw).
%	The "silent" option makes \psfig work silently.
%

% check to see if macros already loaded in (maybe some other file says
% "\input psfig") ...
\ifx\undefined\psfig\else\endinput\fi

%
% from a suggestion by eijkhout@csrd.uiuc.edu to allow
% loading as a style file. Changed to avoid problems
% with amstex per suggestion by jbence@math.ucla.edu

\let\LaTeXAtSign=\@
\let\@=\relax
\edef\psfigRestoreAt{\catcode`\@=\number\catcode`@\relax}
%\edef\psfigRestoreAt{\catcode`@=\number\catcode`@\relax}
\catcode`\@=11\relax
\newwrite\@unused
\def\ps@typeout#1{{\let\protect\string\immediate\write\@unused{#1}}}
\ps@typeout{psfig/tex \PsfigVersion}

%% Here's how you define your figure path.  Should be set up with null
%% default and a user useable definition.

\def\figurepath{./}
\def\psfigurepath#1{\edef\figurepath{#1}}

%
% @psdo control structure -- similar to Latex @for.
% I redefined these with different names so that psfig can
% be used with TeX as well as LaTeX, and so that it will not 
% be vunerable to future changes in LaTeX's internal
% control structure,
%
\def\@nnil{\@nil}
\def\@empty{}
\def\@psdonoop#1\@@#2#3{}
\def\@psdo#1:=#2\do#3{\edef\@psdotmp{#2}\ifx\@psdotmp\@empty \else
    \expandafter\@psdoloop#2,\@nil,\@nil\@@#1{#3}\fi}
\def\@psdoloop#1,#2,#3\@@#4#5{\def#4{#1}\ifx #4\@nnil \else
       #5\def#4{#2}\ifx #4\@nnil \else#5\@ipsdoloop #3\@@#4{#5}\fi\fi}
\def\@ipsdoloop#1,#2\@@#3#4{\def#3{#1}\ifx #3\@nnil 
       \let\@nextwhile=\@psdonoop \else
      #4\relax\let\@nextwhile=\@ipsdoloop\fi\@nextwhile#2\@@#3{#4}}
\def\@tpsdo#1:=#2\do#3{\xdef\@psdotmp{#2}\ifx\@psdotmp\@empty \else
    \@tpsdoloop#2\@nil\@nil\@@#1{#3}\fi}
\def\@tpsdoloop#1#2\@@#3#4{\def#3{#1}\ifx #3\@nnil 
       \let\@nextwhile=\@psdonoop \else
      #4\relax\let\@nextwhile=\@tpsdoloop\fi\@nextwhile#2\@@#3{#4}}
% 
% \fbox is defined in latex.tex; so if \fbox is undefined, assume that
% we are not in LaTeX.
% Perhaps this could be done better???
\ifx\undefined\fbox
% \fbox code from modified slightly from LaTeX
\newdimen\fboxrule
\newdimen\fboxsep
\newdimen\ps@tempdima
\newbox\ps@tempboxa
\fboxsep = 3pt
\fboxrule = .4pt
\long\def\fbox#1{\leavevmode\setbox\ps@tempboxa\hbox{#1}\ps@tempdima\fboxrule
    \advance\ps@tempdima \fboxsep \advance\ps@tempdima \dp\ps@tempboxa
   \hbox{\lower \ps@tempdima\hbox
  {\vbox{\hrule height \fboxrule
          \hbox{\vrule width \fboxrule \hskip\fboxsep
          \vbox{\vskip\fboxsep \box\ps@tempboxa\vskip\fboxsep}\hskip 
                 \fboxsep\vrule width \fboxrule}
                 \hrule height \fboxrule}}}}
\fi
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% file reading stuff from epsf.tex
%   EPSF.TEX macro file:
%   Written by Tomas Rokicki of Radical Eye Software, 29 Mar 1989.
%   Revised by Don Knuth, 3 Jan 1990.
%   Revised by Tomas Rokicki to accept bounding boxes with no
%      space after the colon, 18 Jul 1990.
%   Portions modified/removed for use in PSFIG package by
%      J. Daniel Smith, 9 October 1990.
%
\newread\ps@stream
\newif\ifnot@eof       % continue looking for the bounding box?
\newif\if@noisy        % report what you're making?
\newif\if@atend        % %%BoundingBox: has (at end) specification
\newif\if@psfile       % does this look like a PostScript file?
%
% PostScript files should start with `%!'
%
{\catcode`\%=12\global\gdef\epsf@start{%!}}
\def\epsf@PS{PS}
%
\def\epsf@getbb#1{%
%
%   The first thing we need to do is to open the
%   PostScript file, if possible.
%
\openin\ps@stream=#1
\ifeof\ps@stream\ps@typeout{Error, File #1 not found}\else
%
%   Okay, we got it. Now we'll scan lines until we find one that doesn't
%   start with %. We're looking for the bounding box comment.
%
   {\not@eoftrue \chardef\other=12
    \def\do##1{\catcode`##1=\other}\dospecials \catcode`\ =10
    \loop
       \if@psfile
	  \read\ps@stream to \epsf@fileline
       \else{
	  \obeyspaces
          \read\ps@stream to \epsf@tmp\global\let\epsf@fileline\epsf@tmp}
       \fi
       \ifeof\ps@stream\not@eoffalse\else
%
%   Check the first line for `%!'.  Issue a warning message if its not
%   there, since the file might not be a PostScript file.
%
       \if@psfile\else
       \expandafter\epsf@test\epsf@fileline:. \\%
       \fi
%
%   We check to see if the first character is a % sign;
%   if so, we look further and stop only if the line begins with
%   `%%BoundingBox:' and the `(atend)' specification was not found.
%   That is, the only way to stop is when the end of file is reached,
%   or a `%%BoundingBox: llx lly urx ury' line is found.
%
          \expandafter\epsf@aux\epsf@fileline:. \\%
       \fi
   \ifnot@eof\repeat
   }\closein\ps@stream\fi}%
%
% This tests if the file we are reading looks like a PostScript file.
%
\long\def\epsf@test#1#2#3:#4\\{\def\epsf@testit{#1#2}
			\ifx\epsf@testit\epsf@start\else
\ps@typeout{Warning! File does not start with `\epsf@start'.  It may not be a PostScript file.}
			\fi
			\@psfiletrue} % don't test after 1st line
%
%   We still need to define the tricky \epsf@aux macro. This requires
%   a couple of magic constants for comparison purposes.
%
{\catcode`\%=12\global\let\epsf@percent=%\global\def\epsf@bblit{%BoundingBox}}
%
%
%   So we're ready to check for `%BoundingBox:' and to grab the
%   values if they are found.  We continue searching if `(at end)'
%   was found after the `%BoundingBox:'.
%
\long\def\epsf@aux#1#2:#3\\{\ifx#1\epsf@percent
   \def\epsf@testit{#2}\ifx\epsf@testit\epsf@bblit
	\@atendfalse
        \epsf@atend #3 . \\%
	\if@atend	
	   \if@verbose{
		\ps@typeout{psfig: found `(atend)'; continuing search}
	   }\fi
        \else
        \epsf@grab #3 . . . \\%
        \not@eoffalse
        \global\no@bbfalse
        \fi
   \fi\fi}%
%
%   Here we grab the values and stuff them in the appropriate definitions.
%
\def\epsf@grab #1 #2 #3 #4 #5\\{%
   \global\def\epsf@llx{#1}\ifx\epsf@llx\empty
      \epsf@grab #2 #3 #4 #5 .\\\else
   \global\def\epsf@lly{#2}%
   \global\def\epsf@urx{#3}\global\def\epsf@ury{#4}\fi}%
%
% Determine if the stuff following the %%BoundingBox is `(atend)'
% J. Daniel Smith.  Copied from \epsf@grab above.
%
\def\epsf@atendlit{(atend)} 
\def\epsf@atend #1 #2 #3\\{%
   \def\epsf@tmp{#1}\ifx\epsf@tmp\empty
      \epsf@atend #2 #3 .\\\else
   \ifx\epsf@tmp\epsf@atendlit\@atendtrue\fi\fi}


% End of file reading stuff from epsf.tex
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% trigonometry stuff from "trig.tex"
\chardef\psletter = 11 % won't conflict with \begin{letter} now...
\chardef\other = 12

\newif \ifdebug %%% turn me on to see TeX hard at work ...
\newif\ifc@mpute %%% don't need to compute some values
\c@mputetrue % but assume that we do

\let\then = \relax
\def\r@dian{pt }
\let\r@dians = \r@dian
\let\dimensionless@nit = \r@dian
\let\dimensionless@nits = \dimensionless@nit
\def\internal@nit{sp }
\let\internal@nits = \internal@nit
\newif\ifstillc@nverging
\def \Mess@ge #1{\ifdebug \then \message {#1} \fi}

{ %%% Things that need abnormal catcodes %%%
	\catcode `\@ = \psletter
	\gdef \nodimen {\expandafter \n@dimen \the \dimen}
	\gdef \term #1 #2 #3%
	       {\edef \t@ {\the #1}%%% freeze parameter 1 (count, by value)
		\edef \t@@ {\expandafter \n@dimen \the #2\r@dian}%
				   %%% freeze parameter 2 (dimen, by value)
		\t@rm {\t@} {\t@@} {#3}%
	       }
	\gdef \t@rm #1 #2 #3%
	       {{%
		\count 0 = 0
		\dimen 0 = 1 \dimensionless@nit
		\dimen 2 = #2\relax
		\Mess@ge {Calculating term #1 of \nodimen 2}%
		\loop
		\ifnum	\count 0 < #1
		\then	\advance \count 0 by 1
			\Mess@ge {Iteration \the \count 0 \space}%
			\Multiply \dimen 0 by {\dimen 2}%
			\Mess@ge {After multiplication, term = \nodimen 0}%
			\Divide \dimen 0 by {\count 0}%
			\Mess@ge {After division, term = \nodimen 0}%
		\repeat
		\Mess@ge {Final value for term #1 of 
				\nodimen 2 \space is \nodimen 0}%
		\xdef \Term {#3 = \nodimen 0 \r@dians}%
		\aftergroup \Term
	       }}
	\catcode `\p = \other
	\catcode `\t = \other
	\gdef \n@dimen #1pt{#1} %%% throw away the ``pt''
}

\def \Divide #1by #2{\divide #1 by #2} %%% just a synonym

\def \Multiply #1by #2%%% allows division of a dimen by a dimen
       {{%%% should really freeze parameter 2 (dimen, passed by value)
	\count 0 = #1\relax
	\count 2 = #2\relax
	\count 4 = 65536
	\Mess@ge {Before scaling, count 0 = \the \count 0 \space and
			count 2 = \the \count 2}%
	\ifnum	\count 0 > 32767 %%% do our best to avoid overflow
	\then	\divide \count 0 by 4
		\divide \count 4 by 4
	\else	\ifnum	\count 0 < -32767
		\then	\divide \count 0 by 4
			\divide \count 4 by 4
		\else
		\fi
	\fi
	\ifnum	\count 2 > 32767 %%% while retaining reasonable accuracy
	\then	\divide \count 2 by 4
		\divide \count 4 by 4
	\else	\ifnum	\count 2 < -32767
		\then	\divide \count 2 by 4
			\divide \count 4 by 4
		\else
		\fi
	\fi
	\multiply \count 0 by \count 2
	\divide \count 0 by \count 4
	\xdef \product {#1 = \the \count 0 \internal@nits}%
	\aftergroup \product
       }}

\def\r@duce{\ifdim\dimen0 > 90\r@dian \then   % sin(x+90) = sin(180-x)
		\multiply\dimen0 by -1
		\advance\dimen0 by 180\r@dian
		\r@duce
	    \else \ifdim\dimen0 < -90\r@dian \then  % sin(-x) = sin(360+x)
		\advance\dimen0 by 360\r@dian
		\r@duce
		\fi
	    \fi}

\def\Sine#1%
       {{%
	\dimen 0 = #1 \r@dian
	\r@duce
	\ifdim\dimen0 = -90\r@dian \then
	   \dimen4 = -1\r@dian
	   \c@mputefalse
	\fi
	\ifdim\dimen0 = 90\r@dian \then
	   \dimen4 = 1\r@dian
	   \c@mputefalse
	\fi
	\ifdim\dimen0 = 0\r@dian \then
	   \dimen4 = 0\r@dian
	   \c@mputefalse
	\fi
%
	\ifc@mpute \then
        	% convert degrees to radians
		\divide\dimen0 by 180
		\dimen0=3.141592654\dimen0
%
		\dimen 2 = 3.1415926535897963\r@dian %%% a well-known constant
		\divide\dimen 2 by 2 %%% we only deal with -pi/2 : pi/2
		\Mess@ge {Sin: calculating Sin of \nodimen 0}%
		\count 0 = 1 %%% see power-series expansion for sine
		\dimen 2 = 1 \r@dian %%% ditto
		\dimen 4 = 0 \r@dian %%% ditto
		\loop
			\ifnum	\dimen 2 = 0 %%% then we've done
			\then	\stillc@nvergingfalse 
			\else	\stillc@nvergingtrue
			\fi
			\ifstillc@nverging %%% then calculate next term
			\then	\term {\count 0} {\dimen 0} {\dimen 2}%
				\advance \count 0 by 2
				\count 2 = \count 0
				\divide \count 2 by 2
				\ifodd	\count 2 %%% signs alternate
				\then	\advance \dimen 4 by \dimen 2
				\else	\advance \dimen 4 by -\dimen 2
				\fi
		\repeat
	\fi		
			\xdef \sine {\nodimen 4}%
       }}

% Now the Cosine can be calculated easily by calling \Sine
\def\Cosine#1{\ifx\sine\UnDefined\edef\Savesine{\relax}\else
		             \edef\Savesine{\sine}\fi
	{\dimen0=#1\r@dian\advance\dimen0 by 90\r@dian
	 \Sine{\nodimen 0}
	 \xdef\cosine{\sine}
	 \xdef\sine{\Savesine}}}	      
% end of trig stuff
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\def\psdraft{
	\def\@psdraft{0}
	%\ps@typeout{draft level now is \@psdraft \space . }
}
\def\psfull{
	\def\@psdraft{100}
	%\ps@typeout{draft level now is \@psdraft \space . }
}

\psfull

\newif\if@scalefirst
\def\psscalefirst{\@scalefirsttrue}
\def\psrotatefirst{\@scalefirstfalse}
\psrotatefirst

\newif\if@draftbox
\def\psnodraftbox{
	\@draftboxfalse
}
\def\psdraftbox{
	\@draftboxtrue
}
\@draftboxtrue

\newif\if@prologfile
\newif\if@postlogfile
\def\pssilent{
	\@noisyfalse
}
\def\psnoisy{
	\@noisytrue
}
\psnoisy
%%% These are for the option list.
%%% A specification of the form a = b maps to calling \@p@@sa{b}
\newif\if@bbllx
\newif\if@bblly
\newif\if@bburx
\newif\if@bbury
\newif\if@height
\newif\if@width
\newif\if@rheight
\newif\if@rwidth
\newif\if@angle
\newif\if@clip
\newif\if@verbose
\def\@p@@sclip#1{\@cliptrue}


\newif\if@decmpr

%%% GDH 7/26/87 -- changed so that it first looks in the local directory,
%%% then in a specified global directory for the ps file.
%%% RPR 6/25/91 -- changed so that it defaults to user-supplied name if
%%% boundingbox info is specified, assuming graphic will be created by
%%% print time.
%%% TJD 10/19/91 -- added bbfile vs. file distinction, and @decmpr flag

\def\@p@@sfigure#1{\def\@p@sfile{null}\def\@p@sbbfile{null}
	        \openin1=#1.bb
		\ifeof1\closein1
	        	\openin1=\figurepath#1.bb
			\ifeof1\closein1
			        \openin1=#1
				\ifeof1\closein1%
				       \openin1=\figurepath#1
					\ifeof1
					   \ps@typeout{Error, File #1 not found}
						\if@bbllx\if@bblly
				   		\if@bburx\if@bbury
			      				\def\@p@sfile{#1}%
			      				\def\@p@sbbfile{#1}%
							\@decmprfalse
				  	   	\fi\fi\fi\fi
					\else\closein1
				    		\def\@p@sfile{\figurepath#1}%
				    		\def\@p@sbbfile{\figurepath#1}%
						\@decmprfalse
	                       		\fi%
			 	\else\closein1%
					\def\@p@sfile{#1}
					\def\@p@sbbfile{#1}
					\@decmprfalse
			 	\fi
			\else
				\def\@p@sfile{\figurepath#1}
				\def\@p@sbbfile{\figurepath#1.bb}
				\@decmprtrue
			\fi
		\else
			\def\@p@sfile{#1}
			\def\@p@sbbfile{#1.bb}
			\@decmprtrue
		\fi}

\def\@p@@sfile#1{\@p@@sfigure{#1}}

\def\@p@@sbbllx#1{
		%\ps@typeout{bbllx is #1}
		\@bbllxtrue
		\dimen100=#1
		\edef\@p@sbbllx{\number\dimen100}
}
\def\@p@@sbblly#1{
		%\ps@typeout{bblly is #1}
		\@bbllytrue
		\dimen100=#1
		\edef\@p@sbblly{\number\dimen100}
}
\def\@p@@sbburx#1{
		%\ps@typeout{bburx is #1}
		\@bburxtrue
		\dimen100=#1
		\edef\@p@sbburx{\number\dimen100}
}
\def\@p@@sbbury#1{
		%\ps@typeout{bbury is #1}
		\@bburytrue
		\dimen100=#1
		\edef\@p@sbbury{\number\dimen100}
}
\def\@p@@sheight#1{
		\@heighttrue
		\dimen100=#1
   		\edef\@p@sheight{\number\dimen100}
		%\ps@typeout{Height is \@p@sheight}
}
\def\@p@@swidth#1{
		%\ps@typeout{Width is #1}
		\@widthtrue
		\dimen100=#1
		\edef\@p@swidth{\number\dimen100}
}
\def\@p@@srheight#1{
		%\ps@typeout{Reserved height is #1}
		\@rheighttrue
		\dimen100=#1
		\edef\@p@srheight{\number\dimen100}
}
\def\@p@@srwidth#1{
		%\ps@typeout{Reserved width is #1}
		\@rwidthtrue
		\dimen100=#1
		\edef\@p@srwidth{\number\dimen100}
}
\def\@p@@sangle#1{
		%\ps@typeout{Rotation is #1}
		\@angletrue
%		\dimen100=#1
		\edef\@p@sangle{#1} %\number\dimen100}
}
\def\@p@@ssilent#1{ 
		\@verbosefalse
}
\def\@p@@sprolog#1{\@prologfiletrue\def\@prologfileval{#1}}
\def\@p@@spostlog#1{\@postlogfiletrue\def\@postlogfileval{#1}}
\def\@cs@name#1{\csname #1\endcsname}
\def\@setparms#1=#2,{\@cs@name{@p@@s#1}{#2}}
%
% initialize the defaults (size the size of the figure)
%
\def\ps@init@parms{
		\@bbllxfalse \@bbllyfalse
		\@bburxfalse \@bburyfalse
		\@heightfalse \@widthfalse
		\@rheightfalse \@rwidthfalse
		\def\@p@sbbllx{}\def\@p@sbblly{}
		\def\@p@sbburx{}\def\@p@sbbury{}
		\def\@p@sheight{}\def\@p@swidth{}
		\def\@p@srheight{}\def\@p@srwidth{}
		\def\@p@sangle{0}
		\def\@p@sfile{} \def\@p@sbbfile{}
		\def\@p@scost{10}
		\def\@sc{}
		\@prologfilefalse
		\@postlogfilefalse
		\@clipfalse
		\if@noisy
			\@verbosetrue
		\else
			\@verbosefalse
		\fi
}
%
% Go through the options setting things up.
%
\def\parse@ps@parms#1{
	 	\@psdo\@psfiga:=#1\do
		   {\expandafter\@setparms\@psfiga,}}
%
% Compute bb height and width
%
\newif\ifno@bb
\def\bb@missing{
	\if@verbose{
		\ps@typeout{psfig: searching \@p@sbbfile \space  for bounding box}
	}\fi
	\no@bbtrue
	\epsf@getbb{\@p@sbbfile}
        \ifno@bb \else \bb@cull\epsf@llx\epsf@lly\epsf@urx\epsf@ury\fi
}	
\def\bb@cull#1#2#3#4{
	\dimen100=#1 bp\edef\@p@sbbllx{\number\dimen100}
	\dimen100=#2 bp\edef\@p@sbblly{\number\dimen100}
	\dimen100=#3 bp\edef\@p@sbburx{\number\dimen100}
	\dimen100=#4 bp\edef\@p@sbbury{\number\dimen100}
	\no@bbfalse
}
% rotate point (#1,#2) about (0,0).
% The sine and cosine of the angle are already stored in \sine and
% \cosine.  The result is placed in (\p@intvaluex, \p@intvaluey).
\newdimen\p@intvaluex
\newdimen\p@intvaluey
\def\rotate@#1#2{{\dimen0=#1 sp\dimen1=#2 sp
%            	calculate x' = x \cos\theta - y \sin\theta
		  \global\p@intvaluex=\cosine\dimen0
		  \dimen3=\sine\dimen1
		  \global\advance\p@intvaluex by -\dimen3
% 		calculate y' = x \sin\theta + y \cos\theta
		  \global\p@intvaluey=\sine\dimen0
		  \dimen3=\cosine\dimen1
		  \global\advance\p@intvaluey by \dimen3
		  }}
\def\compute@bb{
		\no@bbfalse
		\if@bbllx \else \no@bbtrue \fi
		\if@bblly \else \no@bbtrue \fi
		\if@bburx \else \no@bbtrue \fi
		\if@bbury \else \no@bbtrue \fi
		\ifno@bb \bb@missing \fi
		\ifno@bb \ps@typeout{FATAL ERROR: no bb supplied or found}
			\no-bb-error
		\fi
		%
%\ps@typeout{BB: \@p@sbbllx, \@p@sbblly, \@p@sbburx, \@p@sbbury} 
%
% store height/width of original (unrotated) bounding box
		\count203=\@p@sbburx
		\count204=\@p@sbbury
		\advance\count203 by -\@p@sbbllx
		\advance\count204 by -\@p@sbblly
		\edef\ps@bbw{\number\count203}
		\edef\ps@bbh{\number\count204}
		%\ps@typeout{ psbbh = \ps@bbh, psbbw = \ps@bbw }
		\if@angle 
			\Sine{\@p@sangle}\Cosine{\@p@sangle}
	        	{\dimen100=\maxdimen\xdef\r@p@sbbllx{\number\dimen100}
					    \xdef\r@p@sbblly{\number\dimen100}
			                    \xdef\r@p@sbburx{-\number\dimen100}
					    \xdef\r@p@sbbury{-\number\dimen100}}
%
% Need to rotate all four points and take the X-Y extremes of the new
% points as the new bounding box.
                        \def\minmaxtest{
			   \ifnum\number\p@intvaluex<\r@p@sbbllx
			      \xdef\r@p@sbbllx{\number\p@intvaluex}\fi
			   \ifnum\number\p@intvaluex>\r@p@sbburx
			      \xdef\r@p@sbburx{\number\p@intvaluex}\fi
			   \ifnum\number\p@intvaluey<\r@p@sbblly
			      \xdef\r@p@sbblly{\number\p@intvaluey}\fi
			   \ifnum\number\p@intvaluey>\r@p@sbbury
			      \xdef\r@p@sbbury{\number\p@intvaluey}\fi
			   }
%			lower left
			\rotate@{\@p@sbbllx}{\@p@sbblly}
			\minmaxtest
%			upper left
			\rotate@{\@p@sbbllx}{\@p@sbbury}
			\minmaxtest
%			lower right
			\rotate@{\@p@sbburx}{\@p@sbblly}
			\minmaxtest
%			upper right
			\rotate@{\@p@sbburx}{\@p@sbbury}
			\minmaxtest
			\edef\@p@sbbllx{\r@p@sbbllx}\edef\@p@sbblly{\r@p@sbblly}
			\edef\@p@sbburx{\r@p@sbburx}\edef\@p@sbbury{\r@p@sbbury}
%\ps@typeout{rotated BB: \r@p@sbbllx, \r@p@sbblly, \r@p@sbburx, \r@p@sbbury}
		\fi
		\count203=\@p@sbburx
		\count204=\@p@sbbury
		\advance\count203 by -\@p@sbbllx
		\advance\count204 by -\@p@sbblly
		\edef\@bbw{\number\count203}
		\edef\@bbh{\number\count204}
		%\ps@typeout{ bbh = \@bbh, bbw = \@bbw }
}
%
% \in@hundreds performs #1 * (#2 / #3) correct to the hundreds,
%	then leaves the result in @result
%
\def\in@hundreds#1#2#3{\count240=#2 \count241=#3
		     \count100=\count240	% 100 is first digit #2/#3
		     \divide\count100 by \count241
		     \count101=\count100
		     \multiply\count101 by \count241
		     \advance\count240 by -\count101
		     \multiply\count240 by 10
		     \count101=\count240	%101 is second digit of #2/#3
		     \divide\count101 by \count241
		     \count102=\count101
		     \multiply\count102 by \count241
		     \advance\count240 by -\count102
		     \multiply\count240 by 10
		     \count102=\count240	% 102 is the third digit
		     \divide\count102 by \count241
		     \count200=#1\count205=0
		     \count201=\count200
			\multiply\count201 by \count100
		 	\advance\count205 by \count201
		     \count201=\count200
			\divide\count201 by 10
			\multiply\count201 by \count101
			\advance\count205 by \count201
			%
		     \count201=\count200
			\divide\count201 by 100
			\multiply\count201 by \count102
			\advance\count205 by \count201
			%
		     \edef\@result{\number\count205}
}
\def\compute@wfromh{
		% computing : width = height * (bbw / bbh)
		\in@hundreds{\@p@sheight}{\@bbw}{\@bbh}
		%\ps@typeout{ \@p@sheight * \@bbw / \@bbh, = \@result }
		\edef\@p@swidth{\@result}
		%\ps@typeout{w from h: width is \@p@swidth}
}
\def\compute@hfromw{
		% computing : height = width * (bbh / bbw)
	        \in@hundreds{\@p@swidth}{\@bbh}{\@bbw}
		%\ps@typeout{ \@p@swidth * \@bbh / \@bbw = \@result }
		\edef\@p@sheight{\@result}
		%\ps@typeout{h from w : height is \@p@sheight}
}
\def\compute@handw{
		\if@height 
			\if@width
			\else
				\compute@wfromh
			\fi
		\else 
			\if@width
				\compute@hfromw
			\else
				\edef\@p@sheight{\@bbh}
				\edef\@p@swidth{\@bbw}
			\fi
		\fi
}
\def\compute@resv{
		\if@rheight \else \edef\@p@srheight{\@p@sheight} \fi
		\if@rwidth \else \edef\@p@srwidth{\@p@swidth} \fi
		%\ps@typeout{rheight = \@p@srheight, rwidth = \@p@srwidth}
}
%		
% Compute any missing values
\def\compute@sizes{
	\compute@bb
	\if@scalefirst\if@angle
% at this point the bounding box has been adjsuted correctly for
% rotation.  PSFIG does all of its scaling using \@bbh and \@bbw.  If
% a width= or height= was specified along with \psscalefirst, then the
% width=/height= value needs to be adjusted to match the new (rotated)
% bounding box size (specifed in \@bbw and \@bbh).
%    \ps@bbw       width=
%    -------  =  ---------- 
%    \@bbw       new width=
% so `new width=' = (width= * \@bbw) / \ps@bbw; where \ps@bbw is the
% width of the original (unrotated) bounding box.
	\if@width
	   \in@hundreds{\@p@swidth}{\@bbw}{\ps@bbw}
	   \edef\@p@swidth{\@result}
	\fi
	\if@height
	   \in@hundreds{\@p@sheight}{\@bbh}{\ps@bbh}
	   \edef\@p@sheight{\@result}
	\fi
	\fi\fi
	\compute@handw
	\compute@resv}

%
% \psfig
% usage : \psfig{file=, height=, width=, bbllx=, bblly=, bburx=, bbury=,
%			rheight=, rwidth=, clip=}
%
% "clip=" is a switch and takes no value, but the `=' must be present.
\def\psfig#1{\vbox {
	% do a zero width hard space so that a single
	% \psfig in a centering enviornment will behave nicely
	%{\setbox0=\hbox{\ }\ \hskip-\wd0}
	%
	\ps@init@parms
	\parse@ps@parms{#1}
	\compute@sizes
	%
	\ifnum\@p@scost<\@psdraft{
		%
		\special{ps::[begin] 	\@p@swidth \space \@p@sheight \space
				\@p@sbbllx \space \@p@sbblly \space
				\@p@sbburx \space \@p@sbbury \space
				startTexFig \space }
		\if@angle
			\special {ps:: \@p@sangle \space rotate \space} 
		\fi
		\if@clip{
			\if@verbose{
				\ps@typeout{(clip)}
			}\fi
			\special{ps:: doclip \space }
		}\fi
		\if@prologfile
		    \special{ps: plotfile \@prologfileval \space } \fi
		\if@decmpr{
			\if@verbose{
				\ps@typeout{psfig: including \@p@sfile.Z \space }
			}\fi
			\special{ps: plotfile "`zcat \@p@sfile.Z" \space }
		}\else{
			\if@verbose{
				\ps@typeout{psfig: including \@p@sfile \space }
			}\fi
			\special{ps: plotfile \@p@sfile \space }
		}\fi
		\if@postlogfile
		    \special{ps: plotfile \@postlogfileval \space } \fi
		\special{ps::[end] endTexFig \space }
		% Create the vbox to reserve the space for the figure.
		\vbox to \@p@srheight sp{
		% 1/92 TJD Changed from "true sp" to "sp" for magnification.
			\hbox to \@p@srwidth sp{
				\hss
			}
		\vss
		}
	}\else{
		% draft figure, just reserve the space and print the
		% path name.
		\if@draftbox{		
			% Verbose draft: print file name in box
			\hbox{\frame{\vbox to \@p@srheight sp{
			\vss
			\hbox to \@p@srwidth sp{ \hss \@p@sfile \hss }
			\vss
			}}}
		}\else{
			% Non-verbose draft
			\vbox to \@p@srheight sp{
			\vss
			\hbox to \@p@srwidth sp{\hss}
			\vss
			}
		}\fi	



	}\fi
}}
\psfigRestoreAt
\let\@=\LaTeXAtSign
