ChangeSet@1.1031.1.4, 2003-03-02 22:55:36-06:00, kai@tp1.ruhr-uni-bochum.de
kbuild: remove dependency on compile.h
We had a dummy dependency on include/linux/compile.h, but it really caused
more trouble than benefits. It's not actually needed for the module
postprocessing, it was only put there to make sure we recognize when
gcc changed under us. However, we really can only do so much, and
the rest of kbuild won't notice a changed gcc either, so if the user replaces
gcc during a build, he just can't rely on the build doing the right thing.
The common cases are still covered, anyway. When the command to invoke
gcc changes ("CC=gcc32") we notice, and when the path to
/usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h
changes (which luckily contains the "2.96", we'll notice and handle that,
too.
ChangeSet@1.1059, 2003-03-02 20:44:00-08:00, elenstev@mesatop.com
[PATCH] fix Coverted -> Converted
This patch fixes what might have been a joke, but wasn't.
Coverted -> Converted
One down, 285 to go.
ChangeSet@1.1058, 2003-03-02 20:38:36-08:00, akpm@digeo.com
[PATCH] cciss: add passthrough ioctl
Patch from Stephen Cameron <steve.cameron@hp.com>
Add new big passthrough ioctl to allow large buffers. Used by e.g. online
array controller firmware flash utility.
ChangeSet@1.1057, 2003-03-02 20:38:23-08:00, akpm@digeo.com
[PATCH] cciss: add CCISS_GETLUNINFO ioctl
Patch from Stephen Cameron <steve.cameron@hp.com>
Add CCISS_GETLUNINFO ioctl.
This ioctl returns the LUNID, number of partitions, and current number of
opens on a logical volume. Used by the array config utility or any app that
needs to send passthrough commands to a particular logical disk.
ChangeSet@1.1056, 2003-03-02 20:38:15-08:00, akpm@digeo.com
[PATCH] cciss: add cmd_type to sendcmd parameters
Patch from Stephen Cameron <steve.cameron@hp.com>
* add cmd_type to sendcmd parameters to allow scsi messages to be
sent down.
* factor out duplicated code into fill_cmd function.
ChangeSet@1.1031.1.3, 2003-03-02 22:38:09-06:00, sam@mars.ravnborg.org
[PATCH] kbuild: Top-level Makefile, trivial tidy up
1) Remove dep from "make help", it is no longer useful
2) replace Generating with GEN when generating version.h
ChangeSet@1.1055, 2003-03-02 20:38:09-08:00, akpm@digeo.com
[PATCH] cciss: retry bus resets
Patch from Stephen Cameron <steve.cameron@hp.com>
Make cciss driver retry 3rd party bus reset aborted commands up to 3 times.
(ported to 2.5 by me, original patch by Charles White)
This is needed for a multi port storage box that can have multiple hosts
connected to it, or be used in a multipath configuration. In certain
configurations SCSI bus resets initiated by one host may affect another host.
ChangeSet@1.1054, 2003-03-02 20:38:02-08:00, akpm@digeo.com
[PATCH] cciss: fix unlikely startup problem
Patch from Stephen Cameron <steve.cameron@hp.com>
* Make cciss driver wait longer for board to enter simple mode to
handle an unlikely corner case. (Hot replace of failed 144GB
drive in RAID 5 set at just the wrong time prior to driver loading
can make the board take a longer than usual time to go into "simple
mode". Without the patch, the driver gives up too early, and consequently
doesn't work. (A reboot will generally "fix" it.) This patch avoids
the problem.
* Fix a couple ioctls to return EAGAIN instead of inappropriate EFAULT.
ChangeSet@1.1053, 2003-03-02 20:37:54-08:00, akpm@digeo.com
[PATCH] hugetlb: fix MAP_FIXED handling
Patch from Rohit Seth
ia64 reserves virtual address region 4 (any address which starts with 0x4)
for huge pages.
Apparently, for hardware reasons, we do not wish to allow mappings with
other page sizes to appear in that region.
This patch prevents the user from being able to place regular MAP_FIXED
mappings into region 4 on ia64. It is a no-op for ia32.
ChangeSet@1.1052, 2003-03-02 20:37:48-08:00, akpm@digeo.com
[PATCH] hugetlbpage documentation update
Patch from Rohit Seth. Updates the hugetlb page documentation.
ChangeSet@1.1051, 2003-03-02 20:37:41-08:00, akpm@digeo.com
[PATCH] remove dead hugetlb_key forward decl
Patch from Rohit Seth. Remove a dead declaration.
ChangeSet@1.1050, 2003-03-02 20:37:34-08:00, akpm@digeo.com
[PATCH] allow CONFIG_SWAP=n for i386
Patch from Christoph Hellwig <hch@sgi.com>
There's a bunch of minor fixes needed to disable the swap code for systems
with mmu.
ChangeSet@1.1049, 2003-03-02 20:37:26-08:00, akpm@digeo.com
[PATCH] fix typo in arch/i386/kernel/mpparse.c in printk
Patch from "Vitezslav Samel" <samel@mail.cz>
Obvious fix of printk level (wrong since 2.5.62).
ChangeSet@1.1048, 2003-03-02 20:37:19-08:00, akpm@digeo.com
[PATCH] ext2: clear ext3 htree flag on directories
Forward port of a change which Ted made to 2.4's ext2.
HTREE backwards compatibility patch.
"I thought (and assumed) this patch had been applied to both the ext2 and
ext3 filesystems in the 2.4 kernel. It turns out it had only made it into
the ext3 filesystem code. This means that if an HTREE-enabled filesystem is
mounted using ext2, it will corrupt the filesystem as far as e2fsck and an
ext3 htree-enabled kernel is concerned. (The corruption won't cause any
data loss, but it will cause e2fsck and an ext3-htree kernel to omit a lot
of warning messages.)"
ChangeSet@1.1047, 2003-03-02 20:37:13-08:00, akpm@digeo.com
[PATCH] clean up redundant code for alloc_pages
Patch from Matthew Dobson <colpatch@us.ibm.com>
Consolidate alloc_pages() and alloc_pages_node(). There is no change in
sizeof(vmlinux).
ChangeSet@1.1046, 2003-03-02 20:37:07-08:00, akpm@digeo.com
[PATCH] Don't panic if TSC is enabled and notsc is used
Patch from: john stultz <johnstul@us.ibm.com>
The kernel will currently panic if it was built with CONFIG_X86_TSC and
someone boots it with `notsc'.
Change it to just print a warning.
ChangeSet@1.1045, 2003-03-02 20:36:59-08:00, akpm@digeo.com
[PATCH] fix preempt-issues with smp_call_function()
Patch from Thomas Schlichter <schlicht@uni-mannheim.de>
Based on a patch from Dave Jones.
It converts a large number of instances of:
smp_call_function(foo);
foo();
into
on_each_cpu(foo);
and in doing so fixes up the preempt-unsafeness of the first version.
ChangeSet@1.1044, 2003-03-02 20:36:51-08:00, akpm@digeo.com
[PATCH] fix presto_get_sb() return value and oops.
Patch from Maneesh Soni <maneesh@in.ibm.com>
It's supposed to return an ERR_PTR value on error, not NULL.
ChangeSet@1.1031.1.2, 2003-03-02 22:36:48-06:00, sam@mars.ravnborg.org
[PATCH] kbuild: do not run split-include for all compilations
When a rule in the top-level Makefile includes scripts as one
of the prerequisites it inherits FORCE, and thus is always build.
include/linux/autoconf.h recently included scripts hereby forcing
split-include to be run for each compilation.
Fix all rules that lists scripts as a prerequisite but did not list FORCE.
Fixed by listing the executable needed direct.
ChangeSet@1.1043, 2003-03-02 20:36:44-08:00, akpm@digeo.com
[PATCH] loop: Fix OOM and oops
The loop driver takes a copy of the data which it is writing. When this
happens on the try_to_free_pages() path, loop can easily consume ALL memory
and bio_copy() will fail to allocate a page.
Loop forgets to check the bio_copy() return value and oopses.
Fix this by dropping PF_MEMALLOC and throttling to the block writeout speed.
The patch exports blk_congestion_wait() to modules for this. This is a
needed export: several filesystems have a "try to allocate and yield if it
failed" loop and blk_congestion_wait() is a more appropriate way of
implementing the sleep in this situation.
ChangeSet@1.1042, 2003-03-02 20:36:38-08:00, akpm@digeo.com
[PATCH] deadline IO scheduler dispatching fix
Patch from Nick Piggin <piggin@cyberone.com.au>
Closes a window in which we can get an invalid (already dispatched) request
in the next_drq cache.
This fixed an oops which was reported by Janet Morgan.
ChangeSet@1.1041, 2003-03-02 20:36:31-08:00, akpm@digeo.com
[PATCH] fix e100 for big-endian machines
Patch from Anton Blanchard <anton@samba.org>
e100 is performing a header checksum calculation which is
a) duplication of the core kernel's calculation of the same and
b) incorrect on big-endian machines.
This fix has been tested on ia32 and pppc64 and acked by davem, jgarzik
and Scott Feldman
ChangeSet@1.1040, 2003-03-02 20:36:23-08:00, akpm@digeo.com
[PATCH] spelling fixes
s/seperate/separate/
ChangeSet@1.1031.1.1, 2003-03-02 22:33:44-06:00, kai@tp1.ruhr-uni-bochum.de
do_mounts: Fix CONFIG_BLK_DEV_MD=m case
We don't really have a nice way to say "compile this when CONFIG_FOO
is y, don't otherwise".
Alternatives are:
obj-$(subst m,,$(CONFIG_FOO)) := foo.o
or
obj-$(CONFIG_FOO) := foo.o
obj-m :=
or
obj-y := do_foo.o
do_foo-$(CONFIG_FOO) := foo.o
I chose the last one, though I'm not particularly happy with either.
ChangeSet@1.1039, 2003-03-02 21:00:15+00:00, rmk@flint.arm.linux.org.uk
[ARM] SA11x0 PCMCIA 8
Fix socket memory mapping bug - we need to take account of the
requested card offset when returning the address for ioremap.
ChangeSet@1.1038, 2003-03-02 20:56:17+00:00, rmk@flint.arm.linux.org.uk
[ARM] SA11x0 PCMCIA 7
Request PCMCIA socket resources without marking them busy - this
allows future modifications to pcmcia to allow it to claim the
CIS resources for statically mapped sockets.
ChangeSet@1.1037, 2003-03-02 20:48:47+00:00, rmk@flint.arm.linux.org.uk
[ARM] SA11x0 PCMCIA 6
Sanitise our pcmcia interrupt handling. Make sure we only use
set_irq_type after the interrupt has been registered.
Register the socket handling interrupts using the function name
rather than some pointer passed by the generic code.
Let the generic sa11x0 code handle the cards interrupt masking.
ChangeSet@1.1036, 2003-03-02 20:16:48+00:00, rmk@flint.arm.linux.org.uk
[ARM] SA11x0 PCMCIA 5
Remove get_irq_info method, passing the information via the init
method instead. The IRQ allocated to a socket never changes on
these platforms, so the extra code was just bloat.
ChangeSet@1.1035, 2003-03-02 20:09:27+00:00, rmk@flint.arm.linux.org.uk
[ARM] SA11x0 PCMCIA 4
Convert all SA11x0 drivers to register with the Linux driver model,
so they work with the pcmcia layer in 2.5.63.
ChangeSet@1.1034, 2003-03-02 19:51:33+00:00, rmk@flint.arm.linux.org.uk
[ARM] SA11x0 PCMCIA 3
Make low level socket_status() method take the socket index as an
argument in the same way that our other methods do. socket_status()
now only returns the status of the requested socket, not all sockets.
ChangeSet@1.1033, 2003-03-02 19:42:53+00:00, rmk@flint.arm.linux.org.uk
[ARM] SA11x0 PCMCIA 2
Make low-level configure_socket() method take the socket number as
a parameter rather than embedded in a structure.
ChangeSet@1.1032, 2003-03-02 19:32:19+00:00, rmk@flint.arm.linux.org.uk
[ARM] SA11x0 PCMCIA 1
Make SA11x0 generic pcmcia implementation fit better with Dominik's
work - pass around our socket structure rather than the socket number
itself. Reference socket operations using the socket structure
rather than a static variable.
ChangeSet@1.1031, 2003-03-02 09:48:38-08:00, stern@rowland.harvard.edu
[PATCH] Fix USB address setting
You wouldn't expect that an innocent two-line patch would practically
destroy the entire functionality of the USB subsystem. But that's what my
last patch did. I didn't realize until I saw it in Greg's list of patches
forwarded to Linus; that patch includes a mistakenly unreverted prior
change. This explains the problems I was having yesterday, and probably
also the problems a great many people are having today.
Anyway, here's the correction -- it puts things back to what they should
have been in the first place. Greg, please apply this and send it to
Linus for his tree as soon as reasonably possible.
ChangeSet@1.1030, 2003-03-01 18:24:05-08:00, rmk@arm.linux.org.uk
[PATCH] Fix cardbus build problem
This is a temporary patch which should get cardbus working again.
In order to use pci_remove_behind_bridge(), we need to separately
allocate the pci_dev structures.
ChangeSet@1.1025.1.120, 2003-03-01 14:47:49-08:00, torvalds@home.transmeta.com
Merge http://linux-isdn.bkbits.net/linux-2.5.make
into home.transmeta.com:/home/torvalds/v2.5/linux
ChangeSet@1.1025.16.1, 2003-03-01 13:26:01-06:00, kai@tp1.ruhr-uni-bochum.de
Merge tp1.ruhr-uni-bochum.de:/scratch/kai/kernel/v2.5/linux-2.5.do_mounts.tmp
into tp1.ruhr-uni-bochum.de:/scratch/kai/kernel/v2.5/linux-2.5.do_mounts
ChangeSet@1.1025.1.119, 2003-03-01 12:57:30-06:00, sam@mars.ravnborg.org
kbuild: Small updates in top-level makefile
1) Define comma so dependency files does not include a '_' in the filename
2) Use correct path for mkspec and mkversion
3) Removed checkhelp - corresponding perl script is no longer present
4) Spelling correction (reported on lkml)
ChangeSet@1.1025.1.118, 2003-03-01 12:55:48-06:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Silence some warnings when building vmlinux
For some people (though not me), the '+' indicating that a command will
invoke a sub-make didn't propagated properly, and caused a warning.
Putting the command all into one line should fix that.
Plus some cosmetics and clean up the per_cpu check.
ChangeSet@1.1025.15.2, 2003-03-01 10:39:28-08:00, rl@hellgate.ch
[PATCH] via-rhine: 1.17 release
Alas no rave reviews on lkml, but the private feedback I have received so
far on the recent changes has been excellent. The Rhine-II is now finally
usable with via-rhine. Time to call it 1.17.
ChangeSet@1.1025.15.1, 2003-03-01 10:39:20-08:00, rl@hellgate.ch
[PATCH] via-rhine: fixing the reset fix
This trivial patch fixes an obvious typo. Please apply.
Bad semicolon in previous patch ([1/2]). Thanks to
Erik@harddisk-recovery.nl for spotting this.
ChangeSet@1.1025.1.117, 2003-03-01 12:31:30-06:00, kai@tp1.ruhr-uni-bochum.de
kbuild: Module postprocessing needs include/linux/compile.h
ChangeSet@1.1025.1.116, 2003-03-01 12:06:26-06:00, kai@tp1.ruhr-uni-bochum.de
Hand merged
ChangeSet@1.1025.1.115, 2003-03-01 08:56:16-08:00, linux@brodo.de
[PATCH] cpufreq (5/5): update documentation
update CPUfreq documentation, and move it to extra directory.
ChangeSet@1.1025.1.114, 2003-03-01 08:54:31-08:00, linux@brodo.de
[PATCH] cpufreq (4/5): update x86 drivers to compile with new "userspace" governor
Update x86 drivers so that they can live with the new cpufreq governor
"userspace".
sparc64 doesn't need any change, and I'll send the corresponding patch
for ARM to Russell King.
ChangeSet@1.1025.1.113, 2003-03-01 08:54:18-08:00, linux@brodo.de
[PATCH] cpufreq (3/5): "userspace" governor
The old /proc/sys/cpu/ - based interface is nothing else than a
cpufreq governor which decides what frequency to use within a policy
based on userspace input. So, convert this interface (and add a
corresponding sysfs file, /sys/devices/sys/cpu0/scaling_setspeed) to
become a cpufreq governor, and move it out to an extra module (which
partly explains the size of this patch).
ChangeSet@1.1025.1.112, 2003-03-01 08:54:06-08:00, linux@brodo.de
[PATCH] cpufreq (2/5): x86 driver updates #2 (acpi, longhaul)
- update the VIA Longhaul driver to use frequency table helpers and
the advanced cpufreq driver registration interface.
- cleanup of the ACPI P-States cpufreq driver
- very small update of the core -- set 24API values ahead of the setpolicy
call.
ChangeSet@1.1025.1.111, 2003-03-01 08:53:57-08:00, linux@brodo.de
[PATCH] cpufreq (1/5): x86 driver updates #1 (elanfreq, gx-suspmod, powernow-k6)
- switch the AMD Elan, AMD PowerNow-K6 and the Cyrix/MediaGX driver
to use the advanced cpufreq_driver registration process
- cleanups
ChangeSet@1.1025.1.110, 2003-02-28 18:58:13-08:00, mulix@mulix.org
[PATCH] trident 1/1 fix operator precedence bug
Fix an operator precedence bug that caused a comparison to always
return false. Patch from John Levon <levon@movementarian.org>.
ChangeSet@1.1025.1.108, 2003-02-28 15:09:01-08:00, torvalds@home.transmeta.com
Merge
ChangeSet@1.1022.5.7, 2003-02-28 15:02:56-08:00, mbligh@aracnet.com
[PATCH] Fix error bounds checking for NUMA-Q
Patch from Dave Hansen.
Fix simple bounding error found by some Stanford-checker type thing
to use the proper MAX_MP_BUSSES define instead of a constant.
ChangeSet@1.1022.5.6, 2003-02-28 15:02:50-08:00, mbligh@aracnet.com
[PATCH] need PIT timer available for NUMA-Q
This simple patch just makes sure the PIT code is available for NUMA-Q
(as its TSCs are not synced).
Has been tested in my tree for over a month on UP, SMP, and NUMA and
compile tested against a variety of different configs.
ChangeSet@1.1022.5.5, 2003-02-28 15:02:42-08:00, mbligh@aracnet.com
[PATCH] Fix kirq_balance up so I can disable it.
At the moment, there are two different switches used, irqbalance_disabled
and no_balance_irq ... each of which switches half the code off. This
patch harmonises them into one (irqbalance_disable), and uses the old
subarch stuff as a default value so that this is auto-disabled on boxes
like NUMA-Q that can't cope with it.
Also renamed no_balance_irq to NO_BALANCE_IRQ as it's really a static
defined number now, not pretending to be a switch variable any more.
Now off by default for NUMA-Q, on by default for others, but can be
disabled with the boot time flag if people desire.
ChangeSet@1.1022.5.4, 2003-02-28 15:02:35-08:00, mbligh@aracnet.com
[PATCH] provide pcibus_to_cpumask from topology
Patch from Matthew Dobson
Provide a pcibus_to_cpumask function in the topology infrastructure to
access the pre-existing array.
ChangeSet@1.1022.5.3, 2003-02-28 15:02:28-08:00, mbligh@aracnet.com
[PATCH] Move pfn_to_nid inline
Patch from William Lee Irwin
Inline and simplify pfn_to_nid - this is called heavily, it's a tiny
function, and makes a noticable difference in system time for kernel
compiles (sorry, lost the data). Is only used on NUMA machines.
Has been tested in my tree for over a month on UP, SMP, and NUMA and
compile tested against a variety of different configs.
ChangeSet@1.1022.5.2, 2003-02-28 15:02:21-08:00, mbligh@aracnet.com
[PATCH] Fix potential NULL pointer
translation_table could be unintialised on machines other than NUMA-Q.
You never see this, as the compiler happens to optimise it away, but
it's still a Really Bad Idea (tm). Thanks to someone whose name I have
unfortunately forgotten for pointing this out.
Has been tested in my tree for over two weeks on UP, SMP, and NUMA and
compile tested against a variety of different configs.
ChangeSet@1.1022.5.1, 2003-02-28 15:02:14-08:00, mbligh@aracnet.com
[PATCH] Move node pgdat into node's own memory
Patch from William Lee Irwin
This moves the node's pgdat into the node's own local memory area along
with the lmem_map.
It only touches arch/i386/mm/discontig.c - ie can only affect NUMA
machines. Has been tested in my tree for over a month on UP, SMP, and
NUMA and compile tested against a variety of different configs.
ChangeSet@1.1025.1.107, 2003-02-28 14:48:32-08:00, mzyngier@freesurf.fr
[PATCH] Fix scsi_probe_and_add_lun
This fixes a bug introduced in the recent scsi_scan.c reorganisation.
Without this patch, my Alpha Jensen was crashing just after detecting
its first SCSI disk. It is now working fine.
ChangeSet@1.1025.1.106, 2003-02-28 14:45:17-08:00, bzzz@tmi.comex.ru
[PATCH] Fix ext3/VFS double freeing warning
After 12 hours of testing it looks like this problem can be
solved by the following..
ChangeSet@1.1025.13.7, 2003-02-28 14:20:05-08:00, levon@movementarian.org
[PATCH] rio500 typo
I believe && is meant here, but I cannot test it. This is against 2.5.63
ChangeSet@1.1025.13.6, 2003-02-28 14:19:46-08:00, levon@movementarian.org
[PATCH] usbcld typo
Against 2.5.63. I believe && is meant here, not &.
ChangeSet@1.1025.13.5, 2003-02-28 14:19:20-08:00, david-b@pacbell.net
[PATCH] USB: kerneldoc/pdf
Move the USB documentation to a separate file.
ChangeSet@1.1025.13.4, 2003-02-28 13:41:54-08:00, baldrick@wanadoo.fr
[PATCH] USB speedtouch: handle usb_string failure
ChangeSet@1.1025.13.3, 2003-02-28 13:34:46-08:00, baldrick@wanadoo.fr
[PATCH] USB speedtouch: be firm when disconnected
Just say -ENODEV
ChangeSet@1.1025.13.2, 2003-02-28 13:34:06-08:00, baldrick@wanadoo.fr
[PATCH] USB speedtouch: don't race the tasklets
ChangeSet@1.1025.11.7, 2003-02-28 09:37:33-08:00, agrover@groveronline.com
ACPI: Update version to 20030228
ChangeSet@1.1025.11.6, 2003-02-28 09:36:32-08:00, agrover@groveronline.com
ACPI: S3 fixes (Ole Rohne)
ChangeSet@1.1025.1.104, 2003-02-27 23:02:33-08:00, torvalds@home.transmeta.com
Avoid memory leak on fork() failure path.
Noticed by Martin Schwidefsky <schwidefsky@de.ibm.com>
ChangeSet@1.1025.1.103, 2003-02-27 23:01:43-08:00, torvalds@home.transmeta.com
d_validate() needs to use "__dget_locked()" since it's holding the
dcache lock.
Found by Maneesh Soni <maneesh@in.ibm.com>
ChangeSet@1.1025.1.100, 2003-02-27 22:41:27-08:00, torvalds@home.transmeta.com
Merge bk://bk.arm.linux.org.uk
into home.transmeta.com:/home/torvalds/v2.5/linux
ChangeSet@1.1025.7.3, 2003-02-27 18:26:01-08:00, rth@are.twiddle.net
[ALPHA] Fix Jensen -Werror failures.
From Marc Zyngier <mzyngier@freesurf.fr>.
ChangeSet@1.1025.7.2, 2003-02-27 18:20:51-08:00, ahaas@airmail.net
[PATCH] C99 initializers for alpha/thread-info.h
Hi.
This trivial patch switches the file to use C99 initializers.
Art Haas
ChangeSet@1.1025.12.3, 2003-02-28 01:28:32+00:00, davej@codemonkey.org.uk
[WATCHDOG] remove remainder of the old broken module locking scheme
ChangeSet@1.1002.1.29, 2003-02-28 01:23:32+00:00, rmk@flint.arm.linux.org.uk
[ARM PATCH] 1404/1: basic Lubbock/PXA250 updates
Patch from Nicolas Pitre
ChangeSet@1.1025.12.2, 2003-02-28 01:13:31+00:00, davej@codemonkey.org.uk
[WATCHDOG] return code checking and various cleanups for ib700wdt.
partly based on a patch from Tariq Shureih to the kernel janitors list.
ChangeSet@1.1002.1.28, 2003-02-28 00:29:33+00:00, rmk@flint.arm.linux.org.uk
[ARM PATCH] 1389/1: update iop3xx support for 2.5 (patch 2 of 4)
Patch from Eli Carter
Supercedes patch 1382
This patch copies the relevant documentation for the iop3xx support
from the 2.4.19-rmk4-ds2 kernel.
ChangeSet@1.1025.11.5, 2003-02-27 16:27:34-08:00, agrover@groveronline.com
ACPI: Update ACPI PHP driver with to use new acpi_walk_resource API
(Bjorn Helgaas)
ChangeSet@1.1025.11.4, 2003-02-27 16:26:34-08:00, agrover@groveronline.com
ACPI: Add S4BIOS support (Pavel Machek)
ChangeSet@1.1025.11.3, 2003-02-27 16:24:20-08:00, agrover@groveronline.com
ACPI: Modify drivers to use new acpi_walk_resource API (Bjorn Helgaas)
ChangeSet@1.1025.11.2, 2003-02-27 16:23:08-08:00, agrover@groveronline.com
ACPI: Interpreter update
- Add acpi_walk_resource support (Bjorn Helgaas)
- Add S4BIOS support (Pavel Machek)
- Rewrite GPE code to deal with future GPE block devices
- Fix a bug that caused long delays when receiving SCIs
- Fix a bug that causes oopses when battery strings are ""
ChangeSet@1.1025.12.1, 2003-02-28 00:22:06+00:00, davej@codemonkey.org.uk
[WATCHDOG] Remove old unneeded borken module locking.
ChangeSet@1.1025.11.1, 2003-02-27 16:11:04-08:00, agrover@groveronline.com
Merge groveronline.com:/root/bk/linux-2.5
into groveronline.com:/root/bk/linux-acpi
ChangeSet@1.1025.5.7, 2003-02-27 16:08:12-08:00, agrover@groveronline.com
ACPI: Add new file for GPE code
ChangeSet@1.1025.5.6, 2003-02-27 16:06:05-08:00, agrover@groveronline.com
ACPI: Add S4BIOS support (Pavel Machek)
ChangeSet@1.1002.1.27, 2003-02-27 23:39:16+00:00, rmk@flint.arm.linux.org.uk
[ARM PATCH] 1426/1: Remove rambase from head.S
Patch from Dirk Behme
Cleanup arch/arm/kernel/head.S a little bit by removing the unused rambase from pgtbl and krnladr macros.
ChangeSet@1.1002.1.26, 2003-02-27 23:37:28+00:00, rmk@flint.arm.linux.org.uk
[ARM PATCH] 1406/1: Enable mtd partitions via mtdparts in dc21285 map driver
Patch from Jonas Larsson
The dc21285 mtd map driver supported RedBoot partitioning only. Kernel command line partitioning was not supported. This patch adds the missing functionality.
ChangeSet@1.1025.1.98, 2003-02-27 14:31:41-08:00, corryk@us.ibm.com
[PATCH] fix recent dm breakage
Dammit! I'm not having a good morning. :(
Missing GFP_xxx argument to kmalloc.
ChangeSet@1.1027, 2003-02-27 13:49:57-08:00, greg@kroah.com
Merge kroah.com:/home/greg/linux/BK/bleed-2.5
into kroah.com:/home/greg/linux/BK/pci-2.5
ChangeSet@1.1025.10.3, 2003-02-27 21:24:31+00:00, davej@codemonkey.org.uk
[AGPGART] Move PCI device IDs to pci_ids.h
ChangeSet@1.1025.10.2, 2003-02-27 21:17:50+00:00, davej@codemonkey.org.uk
[AGPGART] Add support for Intel 852GM / 855GM and 865G
ChangeSet@1.1025.1.97, 2003-02-27 20:48:03+00:00, davej@codemonkey.org.uk
[WATCHDOG] Use symbolic PCI names instead of hardcoded values.
ChangeSet@1.1025.1.96, 2003-02-27 20:45:17+00:00, davej@codemonkey.org.uk
[WATCHDOG] missed C99 named initialiser conversion.
ChangeSet@1.1025.1.95, 2003-02-27 20:38:59+00:00, davej@codemonkey.org.uk
[WATCHDOG] Merge AMD 766/768 TCO Timer/Watchdog driver from 2.4
ChangeSet@1.1025.1.94, 2003-02-27 20:30:25+00:00, davej@codemonkey.org.uk
[WATCHDOG] Remove unnecessary llseek function
ChangeSet@1.1025.6.4, 2003-02-27 09:16:13-08:00, baldrick@wanadoo.fr
[PATCH] USB speedtouch: better proc info
Output the correct device name, show the state of the device (for debugging) and of the
ADSL line (anyone want to write a graphical utility to show this, like under windows?). We
no longer consult the usb_device struct in udsl_atm_proc_read, so don't take a reference
to it. Against Greg's current 2.5 USB tree.
ChangeSet@1.1025.1.92, 2003-02-27 08:49:48-08:00, rl@hellgate.ch
[PATCH] via-rhine: fix races
This patch addresses two distinct races:
- Until now, the driver started the chip for Tx regardless of errors
pending in the status register. Not good if an error occured while
we were queueing packets -- the chip counter had not been reset,
so Tx died. (We can't reliably get an interrupt for every error
condition)
- The Rhine-II (when under load) frequently produces a Tx descriptor
write-back race error. Failing to handle this means waiting for the
netdev watchdog. Fixed.
In addition, we must wait for the Tx engine to turn off on error
conditions before we scavenge the descriptor entries. Failing to do
so will typically lead to performance going down to about 10%: Burst,
timeout, burst, timeout.. (again, with a Rhine-II under load).
ChangeSet@1.1025.1.91, 2003-02-27 08:49:41-08:00, rl@hellgate.ch
[PATCH] via-rhine: reset logic
Since Linus and Jeff raised the issue of PCI posted writes, I cleaned up
wait_for_reset() some more. Experiments show that with MMIO, a reset may
indeed take seemingly longer -- that is fixed by flushing that buffer.
Also, the driver now polls the appropriate register while waiting for the
reset to finish.
ChangeSet@1.1025.1.90, 2003-02-27 08:46:10-08:00, ahaas@airmail.net
[PATCH] C99 initializer for drivers/mtd/nand/spia.c
ChangeSet@1.1025.1.89, 2003-02-27 08:46:01-08:00, ahaas@airmail.net
[PATCH] C99 initializers for drivers/mtd/maps
ChangeSet@1.1025.1.88, 2003-02-27 08:45:53-08:00, ahaas@airmail.net
[PATCH] C99 initializers for drivers/mtd/chips
ChangeSet@1.1025.1.87, 2003-02-27 08:45:45-08:00, ahaas@airmail.net
[PATCH] C99 initializers for drivers/mtd files
ChangeSet@1.1025.1.86, 2003-02-27 08:44:51-08:00, davej@codemonkey.org.uk
[PATCH] Handle empty E820 regions correctly.
ChangeSet@1.1025.1.85, 2003-02-27 08:44:44-08:00, davej@codemonkey.org.uk
[PATCH] Fix ambiguous else in generic serial
Closes bugzilla #307
ChangeSet@1.1025.1.84, 2003-02-27 08:44:37-08:00, davej@codemonkey.org.uk
[PATCH] VIA Nehemiah cache workaround.
It turns out that this bug is only on the pre-production models,
but as a few of them have 'escaped' the labs to the hands of
a few lucky developers, we still need it.
ChangeSet@1.1025.1.83, 2003-02-27 08:44:30-08:00, davej@codemonkey.org.uk
[PATCH] Enable SSE on newer Athlons.
ChangeSet@1.1025.1.82, 2003-02-27 08:44:23-08:00, davej@codemonkey.org.uk
[PATCH] Missing acpi include.
Uses CONFIG_ but doesn't include config.h
ChangeSet@1.1025.1.81, 2003-02-27 08:44:17-08:00, davej@codemonkey.org.uk
[PATCH] Allow booting from 21 sector floppies.
As per bugzilla #179
ChangeSet@1.1025.1.80, 2003-02-27 08:44:11-08:00, davej@codemonkey.org.uk
[PATCH] Extraneous ; in cris eeprom code.
ChangeSet@1.1025.1.79, 2003-02-27 08:44:04-08:00, davej@codemonkey.org.uk
[PATCH] Remove redundant aligns.
ENTRY implies ALIGN.
ChangeSet@1.1025.1.78, 2003-02-27 08:41:57-08:00, hch@sgi.com
[PATCH] remove unused file include/linux/ghash.h
was this actually ever used? :)
ChangeSet@1.1025.1.77, 2003-02-27 08:41:07-08:00, mulix@mulix.org
[PATCH] AD1848 OSS driver build fix
This patch fixes bugzilla bug #398,
http://bugme.osdl.org/show_bug.cgi?id=398, PNP API breakage in the
ad1848 sound driver.
ChangeSet@1.1025.1.76, 2003-02-27 07:17:53-08:00, ahaas@airmail.net
[PATCH] Trivial C99 changes for kernel/posix-timers.c
ChangeSet@1.1025.1.75, 2003-02-27 07:17:46-08:00, ahaas@airmail.net
[PATCH] C99 initializers for include/linux/net.h
ChangeSet@1.1025.1.74, 2003-02-27 07:17:39-08:00, ahaas@airmail.net
[PATCH] Fix initializers on drivers/ide/pci/trident.h
ChangeSet@1.1025.1.73, 2003-02-27 07:15:22-08:00, joe@fib011235813.fsnet.co.uk
[PATCH] dm: deregister the misc device before removing /dev/mapper
Fix problem with devfs when unloading the dm module.
dm-ioctl.c: deregister the misc device, and its associated symlink
*before* removing the /dev/mapper dir. [Alasdair Kergon]
ChangeSet@1.1025.1.72, 2003-02-27 07:15:16-08:00, corryk@us.ibm.com
[PATCH] dm: prevent possible buffer overflow in ioctl interface
Use the correct size for "name" in register_with_devfs().
During Al Viro's devfs cleanup a few versions ago, this function was
rewritten, and the "name" string added. The 32-byte size is not large
enough to prevent a possible buffer overflow in the sprintf() call,
since the hash cell can have a name up to 128 characters.
ChangeSet@1.1025.1.71, 2003-02-27 07:12:12-08:00, joe@fib011235813.fsnet.co.uk
[PATCH] dm: return correct error codes from dm_table_add_target()
Return correct error codes from dm_table_add_target(). [Kevin Corry]
ChangeSet@1.1025.1.70, 2003-02-27 07:12:04-08:00, joe@fib011235813.fsnet.co.uk
[PATCH] dm: __LOW macro fix no. 2
Another fix for the __LOW macro.
When dm_table and dm_target structures are initialized, the "limits" fields
(struct io_restrictions) are initialized to zero (e.g. in dm_table_add_target()
in dm-table.c). However, zero is not a useable value in these fields. The
request queue will never let an I/O through, regardless of how small it might
be, if max_sectors is set to zero (see generic_make_request in ll_rw_blk.c).
This change to the __LOW() macro sets these fields correctly when they are
first initialized. [Kevin Corry]
ChangeSet@1.1025.1.69, 2003-02-27 07:11:57-08:00, joe@fib011235813.fsnet.co.uk
[PATCH] dm: allow slashes in dm device names
Allow slashes ('/') within a DM device name, but not at the beginning.
Devfs will automatically create all necessary sub-directories if a name
with embedded slashes is registered. [Kevin Corry]
ChangeSet@1.1025.1.68, 2003-02-27 07:11:50-08:00, joe@fib011235813.fsnet.co.uk
[PATCH] dm: bug in error path for unknown target type
Silly mistake in error path when an unknown target type is requested.
ChangeSet@1.1025.1.67, 2003-02-27 07:11:42-08:00, joe@fib011235813.fsnet.co.uk
[PATCH] dm: __LOW macro fix no. 1
Fix __LOW macro. [Kevin Corry]
ChangeSet@1.1025.1.66, 2003-02-27 07:11:34-08:00, joe@fib011235813.fsnet.co.uk
[PATCH] dm: ioctl interface wasn't dropping a table reference
When reloading a device the ioctl interface was forgetting to drop a
reference on the new table.
ChangeSet@1.1025.9.1, 2003-02-26 21:05:19-06:00, jejb@raven.il.steeleye.com
Merge by hand
ChangeSet@1.1022.3.14, 2003-02-26 21:56:09-05:00, bunk@fs.tum.de
[PATCH] fix the compilation of sym53c416.c
In 2.5.63 I get the following compile error in drivers/scsi/sym53c416.c:
<-- snip -->
...
gcc -Wp,-MD,drivers/scsi/.sym53c416.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=k6
-Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
-DKBUILD_BASENAME=sym53c416 -DKBUILD_MODNAME=sym53c416 -c -o
drivers/scsi/sym53c416.o drivers/scsi/sym53c416.c
drivers/scsi/sym53c416.c: In function `sym53c416_detect':
drivers/scsi/sym53c416.c:682: too many arguments to function
`pnp_activate_dev'
make[2]: *** [drivers/scsi/sym53c416.o] Error 1
<-- snip -->
The following patch fixes it:
ChangeSet@1.1022.3.13, 2003-02-26 21:55:30-05:00, bunk@fs.tum.de
[PATCH] fix compilation of g_NCR5380.c
In 2.5.63 I get the following compile error in drivers/scsi/g_NCR5380.c:
<-- snip -->
...
gcc -Wp,-MD,drivers/scsi/.g_NCR5380.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=k6
-Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
-DKBUILD_BASENAME=g_NCR5380 -DKBUILD_MODNAME=g_NCR5380 -c -o
drivers/scsi/g_NCR5380.o drivers/scsi/g_NCR5380.c
drivers/scsi/g_NCR5380.c: In function `generic_NCR5380_detect':
drivers/scsi/g_NCR5380.c:326: too many arguments to function
`pnp_activate_dev'
...
make[2]: *** [drivers/scsi/g_NCR5380.o] Error 1
<-- snip -->
The following patch fixes it:
ChangeSet@1.1022.3.12, 2003-02-26 20:41:20-05:00, andmike@us.ibm.com
[PATCH] scsi_set_device_offline lock fix
Patrick pointed out that I could get into a ABBA issue with holding
list_lock while calling scsi_eh_scmd_add which takes host_lock.
A call to scsi_prep_fn already holds the queue_lock and then makes a
call to scsi_get_command which takes list_lock.
-andmike
--
Michael Anderson
andmike@us.ibm.com
=====
name: 00_scsi_set_device_offline.diff
version: 2003-02-26.15:18:19-0800
against: scsi-misc-2.5
scsi.c | 15 +++++++++------
1 files changed, 9 insertions(+), 6 deletions(-)
=====
ChangeSet@1.1025.6.3, 2003-02-26 16:29:39-08:00, greg@kroah.com
[PATCH] USB: add support for two new keyspan drivers
Thanks to kernel1@jsl.com for helping with this patch.
ChangeSet@1.1025.5.5, 2003-02-26 16:29:15-08:00, agrover@groveronline.com
ACPI: Map in entire table before performing checksum (John Stultz)
ChangeSet@1.1025.6.2, 2003-02-26 16:15:42-08:00, stern@rowland.harvard.edu
[PATCH] Trivial patch for usb.h
The usb_snddefctrl and usb_rcvdefctrl macros are wrong. This hasn't shown
up until now because usb_rcvdefctrl isn't used anywhere at all, and
usb_snddefctrl is used exactly once (in core/usb.c).
This patch fixes the macros and moves them to hcd.h.
ChangeSet@1.1025.8.1, 2003-02-26 15:58:12-08:00, mikpe@user.it.uu.se
[PATCH] APIC ID fixes
1) apic_write_around(APIC_ID, boot_cpu_physical_apicid) places the APIC
value in the lower 8 bits of APIC_ID, when it should be in the upper 8. As
as result, it effectively forces the APIC id to always be 0 for the boot
CPU, which is fatal on SMP AMD boxes.
Fix: don't do the write at all. The APIC_ID value should be right already.
2) phys_cpu_present_map = 1 means we always set bit 0, but later on
in setup_local_APIC() we do
if (!clustered_apic_mode &&
!test_bit(GET_APIC_ID(apic_read(APIC_ID)), &phys_cpu_present_map))
BUG();
and the bug is triggered if the APIC_ID is not zero.
Fix: initialize 'phys_cpu_present_map' correctly.
ChangeSet@1.1025.5.4, 2003-02-26 15:06:19-08:00, agrover@groveronline.com
ACPI: Expand the mem= cmdline to allow the specification of reserved and
ACPI DATA blocks (Pavel Machek)
ChangeSet@1.1002.19.3, 2003-02-26 14:53:34-08:00, ink@jurassic.park.msu.ru
[PATCH] alpha: remove ali ide quirk
This quirk doesn't work anyway, the actual problem is fixed
in generic PCI code now.
Ivan.
ChangeSet@1.1002.19.2, 2003-02-26 14:52:43-08:00, ink@jurassic.park.msu.ru
[PATCH] alpha: context switch fixes
- Fix argument order for cmpbge in non-ev67 __ffs(). This caused a machine
check in PAL mode early on boot, apparently in swpctx.
- Sync up ret_from_fork with i386. This fixes "Badness in context_switch .."
flood on UP.
Ivan.
ChangeSet@1.1022.3.11, 2003-02-26 17:04:17-05:00, levon@movementarian.org
[PATCH] AM53C974 typo
Against 2.5.63, untested
regards
john
ChangeSet@1.1022.3.10, 2003-02-26 17:03:18-05:00, hch@lst.de
[PATCH] update nsp_cs to use scsi_add_host / scsi_remove_host
On Wed, Feb 26, 2003 at 08:20:05PM +0100, Christoph Hellwig wrote:
> This patch updates nsp_cs to use scsi_add_host / scsi_remove_host when
> compiledfor Linux 2.5 which allows to get rid of the scsi host list
> walks and is a preparation for allowing to support multiple cards of
> this type.
Sorry, I sent you the wrong paetch, here's the right one:
ChangeSet@1.1022.3.9, 2003-02-26 17:02:42-05:00, levon@movementarian.org
[PATCH] NCR5380 typos
Against 2.5.63, untested
regards
john
ChangeSet@1.1022.3.8, 2003-02-26 17:02:21-05:00, levon@movementarian.org
[PATCH] FlashPoint typo
Against 2.5.63, untested
regards
john
ChangeSet@1.1022.3.7, 2003-02-26 17:01:32-05:00, levon@movementarian.org
[PATCH] aix7xxx_old typo
Untested, against 2.5.63
regards
john
ChangeSet@1.1022.3.6, 2003-02-26 17:00:33-05:00, levon@movementarian.org
[PATCH] sun3_NCR typo
Untested, 2.5.63
ChangeSet@1.1022.3.5, 2003-02-26 16:59:56-05:00, hch@lst.de
[PATCH] scsi_add_host/scsi_Remove_host for aic7xxx/aic79xx
I remember having this submitted a while ago, but here's the code
again, this time with the untested aic79xx bits.
ChangeSet@1.1022.3.4, 2003-02-26 16:59:13-05:00, levon@movementarian.org
[PATCH] IPS driver typo
Not tested, against 2.5.63
regards
john
ChangeSet@1.1022.3.3, 2003-02-26 16:58:45-05:00, eike-kernel@sf-tec.de
[PATCH] Hex numbers in NCR53c406a.c
This patch makes sure that there is a "0x" in front of all hex numbers and
makes all outputs use a single style (all %x instead of mixed %x and %X).
Eike
ChangeSet@1.1025.5.3, 2003-02-26 13:48:18-08:00, agrover@groveronline.com
ACPI: Never use ACPI on VISWS
ChangeSet@1.1025.5.2, 2003-02-26 13:47:36-08:00, agrover@groveronline.com
ACPI: Fix derive_pci_id (Ducrot Bruno, Alvaro Lopez)
ChangeSet@1.1022.3.2, 2003-02-26 15:42:58-06:00, jejb@raven.il.steeleye.com
Merge dj/hch fixes
ChangeSet@1.1022.3.1, 2003-02-26 15:28:41-06:00, davej@codemonkey.org.uk
[PATCH] wd33c93 sync up with 2.4
ChangeSet@1.1002.20.17, 2003-02-26 15:58:53-05:00, davej@codemonkey.org.uk
[PATCH] copy-paste ; breakage in sym_2
Same bug as other sym driver.
ChangeSet@1.1002.20.16, 2003-02-26 15:58:17-05:00, davej@codemonkey.org.uk
[PATCH] important bits.
Spelling fixes! Woo! I gotta get me some of that.
ChangeSet@1.1002.20.15, 2003-02-26 15:57:37-05:00, davej@codemonkey.org.uk
[PATCH] Erroneous colon in sym53c8xx.c
ChangeSet@1.1002.20.14, 2003-02-26 15:56:39-05:00, davej@codemonkey.org.uk
[PATCH] sun3 updates from 2.4
ChangeSet@1.1002.20.13, 2003-02-26 15:55:45-05:00, davej@codemonkey.org.uk
[PATCH] Put sgiwd93.c back in sync with 2.4
ChangeSet@1.1002.20.12, 2003-02-26 15:55:10-05:00, davej@codemonkey.org.uk
[PATCH] fdomain pcmcia update from 2.4
ChangeSet@1.1002.20.11, 2003-02-26 15:54:34-05:00, davej@codemonkey.org.uk
[PATCH] fdomain isa_ API conversion.
ChangeSet@1.1002.20.10, 2003-02-26 15:54:11-05:00, davej@codemonkey.org.uk
[PATCH] dpt_i2o bits from 2.4
First hunk is unexplained.
Second hunk had the 2.4 changeset comment 'fix warnings'
ChangeSet@1.1002.20.9, 2003-02-26 15:53:33-05:00, davej@codemonkey.org.uk
[PATCH] increase aha152x timeouts.
This made it into 2.4, and aparently fixes
a problem with some tape devices.
ChangeSet@1.1002.20.8, 2003-02-26 15:52:54-05:00, davej@codemonkey.org.uk
[PATCH] aacraid extra devices.
>From 2.4
ChangeSet@1.1002.20.7, 2003-02-26 15:52:18-05:00, davej@codemonkey.org.uk
[PATCH] C99 struct initialisers for aacraid
ChangeSet@1.1002.3.24, 2003-02-26 11:19:37-08:00, greg@kroah.com
USB: fix bug that prevented usbcore from shutting down.
ChangeSet@1.1002.3.23, 2003-02-26 11:18:23-08:00, greg@kroah.com
[PATCH] USB: add the rest of the interface descriptor info to sysfs
ChangeSet@1.1025.1.63, 2003-02-26 11:24:34-05:00, jgarzik@redhat.com
Merge redhat.com:/garz/repo/linus-2.5
into redhat.com:/garz/repo/net-drivers-2.5
ChangeSet@1.1025.1.62, 2003-02-25 19:24:48-08:00, torvalds@home.transmeta.com
Fix up kernel/module.c breakage. Bad Rusty!
ChangeSet@1.1025.4.1, 2003-02-25 22:23:16-05:00, jgarzik@redhat.com
Merge redhat.com:/garz/repo/linus-2.5
into redhat.com:/garz/repo/net-drivers-2.5
ChangeSet@1.1025.1.61, 2003-02-25 19:14:29-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: accommodate
accomodate -> accommodate
accomodated -> accommodated
accomodates -> accommodates
ChangeSet@1.1025.1.60, 2003-02-25 19:14:19-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: guarantee
guarentee -> guarantee
guarenteed -> guaranteed
guarentees -> guarantees
ChangeSet@1.1025.1.59, 2003-02-25 19:12:22-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: ugliness
uglyness -> ugliness
ChangeSet@1.1025.1.58, 2003-02-25 19:12:12-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: boundary
boundry -> boundary
boundries -> boundaries
ChangeSet@1.1025.1.57, 2003-02-25 19:12:01-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: invocation
invokation -> invocation
ChangeSet@1.1025.1.56, 2003-02-25 19:11:52-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: whether
wether -> whether
(A "wether" is a castrated goat.)
ChangeSet@1.1025.1.55, 2003-02-25 19:11:41-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: immediately
immediatly -> immediately
ChangeSet@1.1025.1.54, 2003-02-25 19:11:33-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: weird
wierd -> weird
wierdo -> weirdo
wierdness -> weirdness
ChangeSet@1.1025.2.29, 2003-02-25 21:56:31-05:00, jt@hpl.hp.com
[wireless] cleanup after recent shuffle
In kernel 2.5.63, you have moved more wireless LAN drivers
into ../drivers/net/wireless/. Unfortunately, there was a bit more to
cleanup as the result of this work.
You will need to :
o Apply the attached patch
o rm /drivers/net/pcmcia/aironet4500_cs.c
Have fun...
Jean
P.S. : You will notice that I took the liberty to organise the config
option in what I hope is a more logical order.
ChangeSet@1.1025.2.28, 2003-02-25 21:52:41-05:00, jgarzik@redhat.com
[netdrvr tg3] fix TX race in previous code, and another buglet
* call netif_tx_disable after netif_poll_disable, fixing TX race,
in tg3_netif_stop
* follow the ordering of the tg3_netif_stop change, and enable
poll after waking TX, in tg3_netif_start
* after doing those two steps in tg3_netif_start, check for work
using new helper function tg3_cond_int
* add helper function tg3_cond_int, which delivers an interrupt
if and only if the status block was updated (i.e. if work
is likely to be available)
ChangeSet@1.1025.2.27, 2003-02-25 21:51:50-05:00, jgarzik@redhat.com
[netdrvr tg3] properly synchronize with TX, in tg3_netif_stop
ChangeSet@1.1025.2.26, 2003-02-25 21:51:16-05:00, jgarzik@redhat.com
[netdrvr tg3] bump version to 1.4c / Feb 18
ChangeSet@1.1025.2.25, 2003-02-25 21:50:17-05:00, jgarzik@redhat.com
[netdrvr tg3] fix NAPI deadlock
* do not hold driver spinlock during RX processing in tg3_poll
(this is the deadlock fix)
* create netif_poll_{en,dis}able to synchronize against dev->poll()
* create __netif_rx_complete to avoid a third irq-save in tg3_poll
* create tg3_netif_{start,stop} as driver-specific helper functions
which disable and enable NAPI polling and TX queueing. Note that
the TX queueing enable/disable is purely advisory, and is not
intended to prevent any races.
* remove tg3_halt call from tg3_set_power_state, as all callers
have already called tg3_halt, making it redundant. Removing this
function call also eliminates some locking complications.
* use new helper __netif_rx_complete in tg3_poll
* create tg3_reset_task, as a function that runs in process context
which resets the NIC. This is needed because tg3_netif_stop()
calls schedule() in the process of disabling dev->poll.
* schedule tg3_reset_task from tg3_tx_timeout
* schedule tg3_reset_task from tg3_timer
* wrap several tg3_halt...tg3_init_hw sequences with
tg3_netif_stop...tg3_netif_start. In addition to synchronizing
with dev->poll, this additionally fixes bugs where we were not
calling netif_wake_queue, when we should have been.
* move netif_start_queue call to very bottom of tg3_open
* add missing tg3_netif_{start,stop} to tg3_{suspend,resume},
further fixing obvious bugs.
ChangeSet@1.1025.1.53, 2003-02-25 18:49:45-08:00, elenstev@mesatop.com
[PATCH] replace its with it's where appropriate.
This patch replaces its (possessive of it) with it's (it is)
in the following cases where "it is" is meant.
its a -> it's a
its an -> it's an
its not -> it's not
except for the files
arch/cris/boot/rescue/head.S
arch/cris/kernel/kgdb.c
where the substitution is "its not" -> "it is not"
to avoid possible problems with single quotes in assembly comments.
ChangeSet@1.1025.1.52, 2003-02-25 18:49:35-08:00, elenstev@mesatop.com
[PATCH] replace it's with its where appropriate.
This patch replaces it's (it is) with its (possessive of it)
in the following cases where the possessive of it is meant.
to it's -> to its
into it's -> into its
from it's -> from its
of it's -> of its
with it's -> with its
under it's -> under its
about it's -> about its
ChangeSet@1.1025.1.51, 2003-02-25 18:39:42-08:00, torvalds@home.transmeta.com
Merge bk://bk.arm.linux.org.uk
into home.transmeta.com:/home/torvalds/v2.5/linux
ChangeSet@1.1025.1.50, 2003-02-25 18:30:55-08:00, mulix@mulix.org
[PATCH] trident 3/3 use pr_debug instead of TRDBG
use the standard pr_debug macro instead of TRDBG
ChangeSet@1.1025.1.49, 2003-02-25 18:30:10-08:00, mulix@mulix.org
[PATCH] trident 2/3 make me the maintainer
Make Muli Ben-Yehuda the maintainer for trident as per Alan's suggestion
ChangeSet@1.1025.1.48, 2003-02-25 18:30:02-08:00, mulix@mulix.org
[PATCH] trident 1/3 fix "did not come out of reset"
The M5451 can sometimes not come out of reset.
This is non fatal and it continues to work fine, so print a nasty message
but don't fail the driver initialization.
ChangeSet@1.1025.1.47, 2003-02-25 18:26:27-08:00, rusty@rustcorp.com.au
[PATCH] Modules code tidy up
Now that we search for 11 different sections by name, the if/else was
getting unwieldy. Also, handle_section just does relocs, so it's a bit
of a misnomer, and it's best simply moved into the main code.
This open-codes handle_section, which simply does relocations now.
Also adds "find_sec" and uses it to find the various sections.
ChangeSet@1.1025.1.46, 2003-02-25 18:26:20-08:00, rusty@rustcorp.com.au
[PATCH] Modules race fix
Bob Miller points out that the try_module_get in use_module() can, of
course, fail. Secondly, there is a race between setting the module
live, and a simultaneous removal of it.
ChangeSet@1.1025.1.45, 2003-02-25 18:26:11-08:00, gerg@snapgear.com
[PATCH] include unistd.h in m68knommu entry.S
This includes asm/unistd.h in the vector handling code for m68knommu.
It needs the local NR_syscalls define. linux/unistd.h is not assembler
clean, so it must be asm/unistd.h.
ChangeSet@1.1025.1.44, 2003-02-25 18:26:02-08:00, gerg@snapgear.com
[PATCH] create NR_syscalls for m68knommu architecture
This patch creates a local NR_syscalls define for the m68knommu
architecture.
ChangeSet@1.1025.1.43, 2003-02-25 18:25:53-08:00, gerg@snapgear.com
[PATCH] include unistd.h in m68knommu vectors.c
This includes unistd.h in the high level vector handling code. It needs
NR_syscall.
ChangeSet@1.1025.1.42, 2003-02-25 18:25:44-08:00, gerg@snapgear.com
[PATCH] define timer_t and clockid_t for m68k archiecture
This adds m68k defines for __kernel_timer_t and __kernel_clockid_t. The
reset signal changes means these are now needed.
ChangeSet@1.1025.1.41, 2003-02-25 18:25:35-08:00, gerg@snapgear.com
[PATCH] define struct for m68knommu/ColdFire timer registers
This creates a sturcture to mirror the m68knommu/ColdFire CPU timer
hardware. This is a much cleaner approach to accessing the timer
registers than the previous set of register address defines.
ChangeSet@1.1025.1.40, 2003-02-25 18:25:26-08:00, gerg@snapgear.com
[PATCH] switch m68knommu to using asm-generic/siginfo.h
This modifies the m68knommu siginfo include file to use
asm-generic/siginfo.h instead of the asm-m68k/siginfo.h.
The asm-generic/siginfo.h is more appropriate here, and
the m68k is out of date.
ChangeSet@1.1025.1.39, 2003-02-25 18:25:16-08:00, gerg@snapgear.com
[PATCH] include unistd.h in m68knommu syscalltable.S
This includes asm/unistd.h in the system call table setup code for
m68knommu. It needs the local NR_syscalls define. linux/unistd.h is
not assembler clean, so it must be asm/unistd.h.
ChangeSet@1.1025.2.24, 2003-02-25 21:11:12-05:00, jgarzik@redhat.com
[netdrvr tg3] disable 5701 h/w bug workaround during core clock reset
ChangeSet@1.1025.1.38, 2003-02-25 18:08:00-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: don't
dont -> don't (135 occurrences)
ChangeSet@1.1025.1.37, 2003-02-25 18:07:46-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: won't
wont -> won't (21 occurrences)
ChangeSet@1.1025.1.36, 2003-02-25 18:07:36-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: doesn't
doesnt -> doesn't (35 occurrences)
ChangeSet@1.1025.1.35, 2003-02-25 18:07:25-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: couldn't
couldnt -> couldn't (4 occurrences)
ChangeSet@1.1025.1.34, 2003-02-25 18:07:15-08:00, mike@aiinc.ca
[PATCH] Spelling fixes: can't
cant -> can't (28 occurrences)
ChangeSet@1.1025.1.33, 2003-02-25 18:07:07-08:00, bunk@fs.tum.de
[PATCH] small drivers/atm/* cleanup
The patch below does the following:
- remove #if'd kernel 2.2 code
- changes one MIN to min
ChangeSet@1.1025.1.32, 2003-02-25 18:06:58-08:00, davej@codemonkey.org.uk
[PATCH] pnp_activate_dev API changes.
Someone nuked the 2nd arg in 2.5.62, but didn't fix up
all the callers. Lazy.
ChangeSet@1.1025.1.31, 2003-02-25 17:51:57-08:00, hch@sgi.com
[PATCH] small i2c-amd8111 updates
(based on lm_sensors CVS)
ChangeSet@1.1025.1.30, 2003-02-25 17:51:48-08:00, hch@sgi.com
[PATCH] remove unused last argument to i2c_register_entry
(from lm_sensors CVS)
ChangeSet@1.1025.1.29, 2003-02-25 17:51:41-08:00, hch@sgi.com
[PATCH] i2c-dev cleanup
(based on lm_sensors CVS)
ChangeSet@1.1025.1.28, 2003-02-25 17:51:33-08:00, hch@sgi.com
[PATCH] remove kdevname abuse from init/do_mount.c
use bdevname() for block devices.
ChangeSet@1.1025.1.27, 2003-02-25 17:51:25-08:00, hch@sgi.com
[PATCH] remove an unused function from the i2c core
(from lm_sensors CVS)
ChangeSet@1.1025.1.26, 2003-02-25 17:51:16-08:00, hch@sgi.com
[PATCH] remove unused variables from the i2c core
(from lm_sensors CVS)
ChangeSet@1.1025.1.25, 2003-02-25 17:51:08-08:00, hch@sgi.com
[PATCH] remove kdevname abuse from reiserfs
dito
ChangeSet@1.1002.3.22, 2003-02-25 16:10:13-08:00, mdharm@one-eyed-alien.net
[PATCH] USB: Small patch
Here's a small patch to make your tree in sync with mine. Somehow, a
line of comment got lost somewhere.
ChangeSet@1.1002.3.21, 2003-02-25 16:07:43-08:00, greg@kroah.com
[PATCH] USB: fixed potential races in kl5kusb105.c now that there's no locks in the usb-serial core
ChangeSet@1.1002.3.20, 2003-02-25 13:50:42-08:00, josh@joshisanerd.com
[PATCH] USB: KB Gear USB Tablet Drivers
Attached are drivers for the KB Gear JamStudio Tablet. There are two
files, one is against 2.4.20, the other against 2.5.62. I'm hoping this
isn't too late in the 2.4.21-pre stages to get included (or the 2.5, for
that matter =). This driver Works For Me, on both 2.4.20 and 2.5.62.
Anyway, as usual, comments, complaints, and patches are more than
welcome.
ChangeSet@1.1002.3.19, 2003-02-25 11:41:18-08:00, henning@meier-geinitz.de
[PATCH] USB: Fixed generation of devfs names in scanner driver
This patch fixes the generation of devfs names if dynamic minors are disabled.
ChangeSet@1.1002.3.18, 2003-02-25 11:40:54-08:00, henning@meier-geinitz.de
[PATCH] USB: New vendor/product ids for scanner driver
This patch adds vendor/product ids for Artec, Avision, Brother,
Medion, Primax, Prolink, Fujitsu, Plustek, and SYSCAN scanners.
ChangeSet@1.1002.3.17, 2003-02-25 11:32:55-08:00, david-b@pacbell.net
[PATCH] USB: ehci-hcd, partial VIA workaround
This patch resolves a FIXME, which happens to make many of
the VIA problems act significantly less severe. The change
defers unlinking any QH that just became idle, since it's not
unlikely it'll be used again before many milliseconds pass.
It reduces the number of unlink interrupts (IAA), and means
fewer re-activation issues. Like: newly queued TDs being
all or partially processed before the QH gets de-activated.
The VIA hardware seems to have some problems in those cases.
(Which are extremely common on 2.4 kernels, and less so on
2.5 because usb-storage streams data much better now.)
It also starts tracking the "lost IAA" errors that I see on
at least one VT8235 motherboard. It shows in the "registers"
sysfs file. It'd be good to know if it's just my hardware
that has this problem, or if other folk also see it.
ChangeSet@1.1002.3.16, 2003-02-25 11:32:31-08:00, david-b@pacbell.net
[PATCH] USB ohci: "registers" sysfs file
This is a slightly cleaned up version of Kevin's patch to
add a "registers" sysfs debug file. Minor style and whitespace
fixups, prints the other register, resolved config/build
issues (minor).
It also has two minor tweaks: a fix for a potential assertion
violation on a "dead-hc" cleanup path (rare), and wasting less
time blocking irqs when they're already blocked.
ChangeSet@1.1002.3.15, 2003-02-25 11:16:10-08:00, greg@kroah.com
USB: fixed potential races in belkin_sa.c now that there's no locks in the usb-serial core
ChangeSet@1.1002.3.14, 2003-02-25 11:12:34-08:00, greg@kroah.com
[PATCH] USB: fix potential races in mct_u232 now that there's no locks in the usb-serial core.
ChangeSet@1.1025.2.22, 2003-02-25 09:07:48-08:00, akpm@digeo.com
[PATCH] fix md /proc oops
It it is using a pointer to a ctl_table for its proc_handler function
pointer. Goes oops.
ChangeSet@1.1025.2.21, 2003-02-25 09:07:39-08:00, akpm@digeo.com
[PATCH] remove MAX_BLKDEV from genhd.c
Patch from Andries.Brouwer@cwi.nl
A patch for genhd.c:
- removed outdated comments
- removed MAX_BLKDEV
In genhd.c the variable MAX_BLKDEV was only the size of a hash
table, so I made it MAX_PROBE_HASH. It can be 1, or 23, or 256, or
whatever one wants.
Note that the current setup requires that every device number
in a given range is mapped by dev_to_index() to the same index
in the hash table, so this routine will have to be adapted in
case one wants to register multimajor ranges.
Discussion is possible about whether struct blk_probe needs
a dev_t or a kdev_t, but I left things this time.
If a range can end at precisely the end of [k]dev_t space,
the old code was wrong since (p->dev + p->range) would be 0.
That is why "p->dev + p->range <= dev" was replaced by
"p->dev + p->range - 1 < dev".
ChangeSet@1.1025.2.20, 2003-02-25 09:07:33-08:00, akpm@digeo.com
[PATCH] ext3: speed up O_SYNC writes
This is a forward-port of a 2.4 change from Stephen. The (old) 2.5 code is
forcing a commit on every write by artificially dirtying the inode.
But generic_file_aio_write() has called generic_osync_inode() for us, which
has synced the file data. There is no need to force the extra commit.
ChangeSet@1.1025.2.19, 2003-02-25 09:07:24-08:00, akpm@digeo.com
[PATCH] add some missing gloabl_flush_tlb() calls
Patch from Thomas Schlichter <schlicht@uni-mannheim.de>
Adds some missing global_flush_tlb() calls, which are requried after a call
to change_page_attr().
ChangeSet@1.1025.2.18, 2003-02-25 09:07:16-08:00, akpm@digeo.com
[PATCH] don't let OOM killer kill same process repeatedly
Patch from Rik van Riel <riel@imladris.surriel.com>
If a process cannot exit because it's stuck in eg. a driver, it doesn't make
sense to have the OOM killer kill it repeatedly; that could lead to a hung
system.
Instead, kill another process if the first process we tried to kill hasn't
made any move to exit within 5 seconds. This way we have a much better
chance of recovering the system.
ChangeSet@1.1025.2.17, 2003-02-25 09:07:08-08:00, akpm@digeo.com
[PATCH] fix IRQ balancing disable controls
Patch from "Martin J. Bligh" <mbligh@aracnet.com>
Fixes up the logic and code which is used to suppress the IRQ balancing code.
We now just have a single boolean, "irqbalance_disabled". The initial value
comes from the per-platform "NO_BALANCE_IRQ" constant.
If the platform defaults to "on", users can override this with the
"noirqbalance" kernel boot option.
ChangeSet@1.1025.2.16, 2003-02-25 09:07:00-08:00, akpm@digeo.com
[PATCH] ext3: fix htree memory leaks
Patch from Alex Tomas <bzzz@tmi.comex.ru>
Fixes a couple of memory leaks in the htree code.
ChangeSet@1.1025.2.15, 2003-02-25 09:06:52-08:00, akpm@digeo.com
[PATCH] fix bug in slab.c debugging
Patch from John Levon <levon@movementarian.org>
Looked like this condition was previously always false ...
ChangeSet@1.1025.2.14, 2003-02-25 09:06:43-08:00, akpm@digeo.com
[PATCH] Fix race between umount and inode pruning
Patch from Hugh Dickins <hugh@veritas.com>
When prune_icache coincides with unmounting, invalidate_inodes notices
the inode it's working on as busy but doesn't wait: Self-destruct in 5
seconds message, and later iput oopses on freed super_block.
Neither end is a fast path, so the patch just adds iprune_sem for exclusion.
The semaphore is held across dispose_list so that
dispose_list->clear_inode->destroy_inode cannot reference a destroyed
superblock.
ChangeSet@1.1025.2.13, 2003-02-25 09:06:35-08:00, akpm@digeo.com
[PATCH] SARD accounting fix
Patch from Rick Lindsley <ricklind@us.ibm.com>
Fixes a couple of odd cases in which disk requests were not being accounted
for.
ChangeSet@1.1025.2.12, 2003-02-25 09:06:28-08:00, akpm@digeo.com
[PATCH] Remove redundant check in pte_alloc_map()
This check is not needed - the PMD is known to be present.
ChangeSet@1.1025.2.11, 2003-02-25 09:06:20-08:00, akpm@digeo.com
[PATCH] Check for zero d_count in dget()
Patch from Maneesh Soni <maneesh@in.ibm.com>
Turns out that sysfs is doing dget() on a zero-ref dentry. That's a bug, but
dcache is no longer detecting it.
The check was removed because with lockless d_lookup, there can be cases when
d_lookup and dput are going on concurrently, If d_lookup happens earlier then
it may do dget() on a dentry for which dput() has decremented the ref count
to zero. This race is handled by taking the per dentry lock and checking the
DCACHE_UNHASHED flag.
The patch open-codes that part of d_lookup(), and restores the BUG check in
dget().
ChangeSet@1.1025.2.10, 2003-02-25 09:06:12-08:00, akpm@digeo.com
[PATCH] Make kIrDAd us interruptible sleep
Use interruptible sleep rather than uninterruptible to avoid perturbing load
average.
ChangeSet@1.1025.2.9, 2003-02-25 09:06:04-08:00, akpm@digeo.com
[PATCH] use find_get_page() in do_generic_mapping_read()
do_generic_mapping_read() has an open-coded version of find_get_page() hidden
inside it.
ChangeSet@1.1025.2.8, 2003-02-25 09:05:56-08:00, akpm@digeo.com
[PATCH] x440 SRAT parsing
Use the early ioremap code to parse the Static Resource Affinity Table on
x440 machines.
ChangeSet@1.1025.2.7, 2003-02-25 09:05:48-08:00, akpm@digeo.com
[PATCH] Early ioremap support for ia32
Patch from Patricia Gaughen <gone@us.ibm.com>,
Dave Hansen <haveblue@us.ibm.com>
It provides a very early sort of kmap-by-hand.
The patch is used by the x440 discontigmem to map the srat tables into low
memory so that the memory can be setup. This remap function is used very
early in the boot process... at the start of setup_arch().
This functionality is only available to Summit and NUMAQ. It will work on
other platforms, but they do not need it.
ChangeSet@1.1025.2.6, 2003-02-25 09:05:40-08:00, akpm@digeo.com
[PATCH] flush_tlb_all preempt safety for voyager
Patch from Thomas Schlichter <schlicht@uni-mannheim.de>
Make flush_tlb_all() preempt-safe. Same as the ia32 fix.
ChangeSet@1.1025.2.5, 2003-02-25 09:05:32-08:00, akpm@digeo.com
[PATCH] crc32 optimizations
Patch from Joakim Tjernlund <joakim.tjernlund@lumentis.se>
Here is another update(against BK curr) for crc32(). A kind soul pointed out
the optimizations below.
lib/crc32defs.h:
- Make it possible to define new values for CRC_LE_BITS/CRC_BE_BITS without
modifying the source.
lib/crc32.c:
- Eliminate the need for ENDIAN_SHIFT. Saves a 24 bit shift in the byte
loops.
- Swap the XOR expression in DO_CRC. gcc for x86 can not do that simple
optimization itself(gcc 3.2.2 and RH gcc 2.96 tested). Will improve
performance with 20-25% on x86.
ChangeSet@1.1025.2.4, 2003-02-25 09:05:22-08:00, akpm@digeo.com
[PATCH] Fix slab batchcount limiting code
Spotted by Anton Blanchard: Our attempt to limit the interrupts-off time in
slab wasn't very effective. #ifndef DEBUG is never true.
ChangeSet@1.1025.2.3, 2003-02-25 09:05:14-08:00, akpm@digeo.com
[PATCH] hugetlb put_page speedup
Rework this function so that we only make the indirect call to the
page-freeing function on the final put_page(), rather than on every
invokation.
ChangeSet@1.1025.2.2, 2003-02-25 09:05:06-08:00, akpm@digeo.com
[PATCH] Fix user time accounting's handling of jiffies wrap
Patch from Hugh Dickins <hugh@veritas.com>
Userspace shows huge elapsed time across jiffies wrap: with USER_HZ less then
HZ, sys_times needs jiffies_64 to calculate its retval.
ChangeSet@1.1025.2.1, 2003-02-25 09:04:59-08:00, akpm@digeo.com
[PATCH] make jiffies wrap 5 min after boot
From Tim Schmielau <tim@physik3.uni-rostock.de>
Force jiffies to start out at five-minutes-before-wrap. To find
jiffy-wrapping bugs.
ChangeSet@1.1025.1.23, 2003-02-25 17:21:16+01:00, hch@sgi.com
[XFS] Remove flags argument from xattr inode operations again
SGI Modid: 2.5.x-xfs:slinx:140255a
ChangeSet@1.1025.1.22, 2003-02-25 17:14:01+01:00, nathans@sgi.com
[XFS] Transition from xfsroot attribute namespace to the more generic trusted
namespace which other filesystems are also supporting.
SGI Modid: 2.5.x-xfs:slinx:140237a
ChangeSet@1.1025.1.21, 2003-02-25 17:11:59+01:00, hch@sgi.com
[XFS] shut up gcc warnings about _lsn_cmp
SGI Modid: 2.5.x-xfs:slinx:140187a
ChangeSet@1.1025.1.20, 2003-02-25 17:10:04+01:00, hch@sgi.com
[XFS] fix compilation with CONFIG_SYSCTL=n
SGI Modid: 2.5.x-xfs:slinx:140173a
ChangeSet@1.1025.1.19, 2003-02-25 17:07:56+01:00, hch@sgi.com
[XFS] spin_lock_irqsave must take an ulong, not int. Spotted by Anton Blanchard <anton@samba.org>
SGI Modid: 2.5.x-xfs:slinx:140135a
ChangeSet@1.1025.1.18, 2003-02-25 17:06:02+01:00, nathans@sgi.com
[XFS] Revert the recent hashing change, performance seemed to go way down in
certain benchmarks. This is reverted to how it was, except the number
of hash buckets is larger than previously to attempt to account for the
workload Steve was originally targetting with that change.
SGI Modid: 2.5.x-xfs:slinx:140053a
ChangeSet@1.1025.1.17, 2003-02-25 17:01:46+01:00, nathans@sgi.com
[XFS] Fix some comments, remove an unused variable from the stack, fix missing
clear of pb_locking field if IO completion handled in pagebuf_iorequest.
SGI Modid: 2.5.x-xfs:slinx:140047a
ChangeSet@1.1025.1.16, 2003-02-25 16:59:27+01:00, nathans@sgi.com
[XFS] Remove some off_t abuse in pagebuf_offset and the page_io routine,
after some careful analysis.
SGI Modid: 2.5.x-xfs:slinx:140039a
ChangeSet@1.1025.1.15, 2003-02-25 16:57:34+01:00, sandeen@sgi.com
[XFS] Allow the pagebuf daemon to suspend.
SGI Modid: 2.5.x-xfs:slinx:140015a
ChangeSet@1.1025.1.14, 2003-02-24 21:03:28-08:00, elenstev@mesatop.com
[PATCH] Spelling fixes for paticular -> particular and others.
This patch provides the following spelling fixes:
paticular -> particular
usefull -> useful
occurance -> occurrence
occurances -> occurrences
successfull -> successful
ChangeSet@1.1025.1.13, 2003-02-24 21:03:13-08:00, elenstev@mesatop.com
[PATCH] Spelling fixes for shold -> should and others
This patch provides spelling fixes for the following:
shold -> should
Docement -> Document
docomented -> documented
whic -> which
thresold -> threshold
asociation -> association
ChangeSet@1.1025.1.12, 2003-02-24 21:03:04-08:00, elenstev@mesatop.com
[PATCH] Spelling fixes for negotation -> negotiation and others.
This patch provides the following spelling fixes:
negotation -> negotiation
stabelized -> stabilized
labled -> labeled
availible -> available
tabel -> table
ChangeSet@1.1025.1.11, 2003-02-24 21:02:54-08:00, elenstev@mesatop.com
[PATCH] Spelling fixes for relevent -> relevant
This patch provides spelling fixes for the following:
relevent -> relevant
irrelevent -> irrelevant
ChangeSet@1.1025.1.10, 2003-02-24 21:02:46-08:00, elenstev@mesatop.com
[PATCH] 2.5.63 loose pedantry; loose -> lose where appropriate.
This patch replaces "loose" with "lose" where appropriate.
There remain 56 correct uses of "loose" in the 2.5 kernel source.
ChangeSet@1.1025.1.9, 2003-02-24 21:02:34-08:00, elenstev@mesatop.com
[PATCH] Spelling fixes handel -> handle
This patch provides the following spelling fixes:
handel -> handle
handeling -> handling
handeled -> handled
handeler -> handler
ChangeSet@1.1025.1.8, 2003-02-24 19:58:15-08:00, mike@aiinc.ca
[PATCH] Spelling fixes - privilege
This fixes:
priviledge -> privilege
priviledged -> privileged
unpriviledged -> unprivileged
nonpriviledged -> nonprivileged
Fixes 7 occurrences in all.
ChangeSet@1.1025.1.7, 2003-02-24 19:58:06-08:00, mike@aiinc.ca
[PATCH] Spelling fixes - necessary
This fixes:
neccessary -> necessary
unneccessary -> unnecessary
Fixes 46 occurrences in all.
ChangeSet@1.1025.1.6, 2003-02-24 19:57:55-08:00, mike@aiinc.ca
[PATCH] Spelling fixes - initial
This fixes:
intial -> initial
intially -> initially
intiali[sz]e -> initiali[sz]e
intiali[sz]ed -> initiali[sz]ed
intiali[sz]es -> initiali[sz]es
intiali[sz]ation -> initiali[sz]ation
Fixes 32 occurrences in all.
ChangeSet@1.1025.1.5, 2003-02-24 19:57:45-08:00, mike@aiinc.ca
[PATCH] Spelling fixes - transceiver
This fixes:
tranceiver -> transceiver
Some function names had this misspelling (e.g. e100_reset_tranceiver)
and I changed them, but I haven't tested it.
Fixes 34 occurrences in all.
ChangeSet@1.1025.1.4, 2003-02-24 19:57:35-08:00, mike@aiinc.ca
[PATCH] Spelling fixes - occurred
This fixes:
occured -> occurred
Fixes 135 occurrences in all.
ChangeSet@1.1025.1.3, 2003-02-24 19:57:21-08:00, mike@aiinc.ca
[PATCH] Spelling fixes - occurring
This fixes:
occuring -> occurring
Fixes 29 occurrences in all.
ChangeSet@1.1025.1.2, 2003-02-24 19:57:11-08:00, mike@aiinc.ca
[PATCH] Spelling fixes - receive
This fixes:
recieve -> receive
recieved -> received
reciever -> receiver
Fixes 14 occurrences in all.
ChangeSet@1.1025.1.1, 2003-02-24 19:57:02-08:00, mike@aiinc.ca
[PATCH] Spelling fixes - occurrence
This fixes:
occurence -> occurrence
occurences -> occurrences
Fixes 13 occurrences (literally!) in all.
ChangeSet@1.1002.12.11, 2003-02-24 20:26:10-06:00, kai@tp1.ruhr-uni-bochum.de
kbuild: make -j race fix, cosmetics
Yet another "make -j" race fixed, and
print the right number of spaces for consisting output
ChangeSet@1.1022.2.14, 2003-02-24 16:35:48-08:00, greg@kroah.com
[PATCH] CPCI core: remove unneeded visit device on unconfigure.
The driver now links properly, but this is untested due to my
lack of cPCI hardware.
ChangeSet@1.1022.2.13, 2003-02-24 16:33:09-08:00, greg@kroah.com
[PATCH] PCI: export pci_scan_bus_parented which is needed by the IBM pci hotplug driver.
ChangeSet@1.1022.2.12, 2003-02-24 16:32:16-08:00, greg@kroah.com
[PATCH] IBM PCI Hotplug: convert driver to use pci_bus_remove_device()
Also cleaned up a lot of unnecessary bus walking on device startup
and shutdown.
ChangeSet@1.1022.2.11, 2003-02-24 16:31:00-08:00, greg@kroah.com
[PATCH] ACPI PCI hotplug: convert to use pci_remove_bus_device()
Also got rid of some unneeded bus walking on device init and shutdown.
ChangeSet@1.1022.2.10, 2003-02-24 16:30:40-08:00, greg@kroah.com
[PATCH] Compaq PCI Hotplug: remove unused walk of the device on insertion.
ChangeSet@1.1022.2.9, 2003-02-24 16:29:53-08:00, greg@kroah.com
[PATCH] Compaq PCI Hotplug: convert to use pci_remove_bus_device instead of custom code.
ChangeSet@1.1022.2.8, 2003-02-24 16:28:58-08:00, rmk@arm.linux.org.uk
[PATCH] PCI: Make hot unplugging of PCI buses work
Here's the updated patch:
- Scott spotted a leak my handling of procfs wrt buses.
- I've also killed pci_remove_device() entirely - it is now inlined.
- After one of Alan's mails, I decided that pci_remove_behind_bridge()
is a much better name than pci_remove_all_bus_devices()
ChangeSet@1.1022.2.7, 2003-02-24 16:27:59-08:00, hch@lst.de
[PATCH] PCI: remove check_region abuse (and code duplication) from pci hp code
We have a function pci_dev_driver() to check whether a pci_dev has an
driver attached to it. It's handling of legacy devices is a bit simpler
than what the hotplug code did (duplicated in various places), but if
that stuff is really needed the generic code should be updated.
ChangeSet@1.1022.2.6, 2003-02-24 16:27:32-08:00, greg@kroah.com
[PATCH] Compaq PCI Hotplug: rename cpqphp_proc.c to cpqphp_sysfs.c
ChangeSet@1.1022.2.5, 2003-02-24 16:26:59-08:00, greg@kroah.com
[PATCH] Compaq PCI Hotplug: move /proc files to sysfs
ChangeSet@1.1022.2.4, 2003-02-24 16:26:14-08:00, greg@kroah.com
[PATCH] PCI Hotplug: remove the list_lock, as we rely on sysfs to detect any duplicate slot names.
ChangeSet@1.1022.2.3, 2003-02-24 16:25:54-08:00, greg@kroah.com
[PATCH] IBM PCI Hotplug: get rid of unneeded ops structure and surrounding logic.
ChangeSet@1.1022.2.2, 2003-02-24 16:25:28-08:00, greg@kroah.com
[PATCH] IBM PCI Hotplug: fix typo in previous patch.
ChangeSet@1.1022.2.1, 2003-02-24 16:24:48-08:00, greg@kroah.com
[PATCH] IBM PCI Hotplug: Clean up the error handling logic for a number of functions, and fix a locking mess.
ChangeSet@1.1002.1.25, 2003-02-24 23:33:34+00:00, rmk@flint.arm.linux.org.uk
Merge rmk@master.kernel.org:/home/dwmw2/BK/uart-2.5
into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk
ChangeSet@1.1002.20.6, 2003-02-24 18:13:34-05:00, joel.buckley@sun.com
Sun StorEdge[tm] array SparseLUN support
Hello, I work on the Sun StorEdge[tm] arrays for Sun Microsystems, Inc.
As part of my testing of Linux, the attached changes are needed to enable
Sparse LUN support for Sun StorEdge[tm] arrays.
ChangeSet@1.1025, 2003-02-24 14:58:18-08:00, torvalds@penguin.transmeta.com
Make ACPI dmi fixup properly depend on CONFIG_ACPI_SLEEP
ChangeSet@1.1024, 2003-02-24 14:46:59-08:00, sam@ravnborg.org
[PATCH] fix make rpm
make rpm has been broken in several kernel versions, fix it. Solves
http://bugme.osdl.org/show_bug.cgi?id=373 which Paolo Ciarrocchi pushed
me to fix.
1) Moved make rpm to the noconfig section, thus allowing it to see
the clean target.
2) Fixed the commandline for find
3) Use rpmbuild if present
4) In mkspec use the generic all target, and drop the dep target
This made the build command arch independent
ChangeSet@1.1023, 2003-02-24 14:45:35-08:00, pavel@ucw.cz
[PATCH] swsusp and S3 fixes
These are minor fixes for swsusp and S3 sleep.
- #ifdef mess in acpi_save_state_mem() is simplified
- better error handling in reserving bootmem
- handle video bioses that play with segment registers
- automagic support for S3 on toshiba notebook
- don't try to sync() when pdflush is already stopped
- reorder actions to make pdflush not complain
ChangeSet@1.914.189.1, 2003-02-24 18:20:23-01:00, davej@codemonkey.org.uk
[WATCHDOG] SuperH 5 support for SH watchdog driver.
From patch in 2.4 by Paul Mundt
ChangeSet@1.1022, 2003-02-24 10:58:48-08:00, torvalds@home.transmeta.com
Linux 2.5.63
TAG: v2.5.63