patch-2.1.19 linux/arch/sparc64/config.in

• Lines: 150
• Date: Mon Dec 30 11:59:59 1996
• Orig file: v2.1.18/linux/arch/sparc64/config.in
• Orig date: Thu Jan 1 02:00:00 1970

diff -u --recursive --new-file v2.1.18/linux/arch/sparc64/config.in linux/arch/sparc64/config.in
@@ -0,0 +1,149 @@
+# $Id: config.in,v 1.1 1996/12/27 17:28:19 davem Exp $
+# For a description of the syntax of this configuration file,
+# see the Configure script.
+#
+mainmenu_name "Linux/SPARC Kernel Configuration"
+
+mainmenu_option next_comment
+comment 'Code maturity level options'
+bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
+endmenu
+
+mainmenu_option next_comment
+comment 'Loadable module support'
+bool 'Enable loadable module support' CONFIG_MODULES
+if [ "$CONFIG_MODULES" = "y" ]; then
+  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
+  bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD
+fi
+endmenu
+
+mainmenu_option next_comment
+comment 'General setup'
+
+bool 'Support for AP1000 multicomputer' CONFIG_AP1000
+
+if [ "$CONFIG_AP1000" = "y" ]; then
+	define_bool CONFIG_NO_KEYBOARD y
+	define_bool CONFIG_APFDDI y
+	define_bool CONFIG_APBLOCK y
+	define_bool CONFIG_APBIF y
+	tristate 'OPIU DDV Driver' CONFIG_DDV
+else
+	# Global things across all Sun machines.
+	define_bool CONFIG_SBUS y
+	define_bool CONFIG_SBUSCHAR y
+	define_bool CONFIG_SUN_MOUSE y
+	define_bool CONFIG_SERIAL y
+	define_bool CONFIG_SUN_SERIAL y
+	define_bool CONFIG_SUN_KEYBOARD y
+	define_bool CONFIG_SUN_CONSOLE y
+	define_bool CONFIG_SUN_AUXIO y
+	define_bool CONFIG_SUN_IO y
+	source drivers/sbus/char/Config.in
+fi
+
+tristate 'Openprom tree appears in /proc/openprom (EXPERIMENTAL)' CONFIG_SUN_OPENPROMFS
+bool 'Networking support' CONFIG_NET
+bool 'System V IPC' CONFIG_SYSVIPC
+tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
+tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+  tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
+fi
+endmenu
+
+mainmenu_option next_comment
+comment 'Floppy, IDE, and other block devices'
+
+bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD
+
+bool 'Multiple devices driver support' CONFIG_BLK_DEV_MD
+if [ "$CONFIG_BLK_DEV_MD" = "y" ]; then
+  tristate '   Linear (append) mode' CONFIG_MD_LINEAR
+  tristate '   RAID-0 (striping) mode' CONFIG_MD_STRIPED
+#  tristate '   RAID-1 (mirroring) mode' CONFIG_MD_MIRRORING
+fi
+
+tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
+if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
+  bool '   Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
+fi
+
+tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
+
+endmenu
+
+if [ "$CONFIG_NET" = "y" ]; then
+	source net/Config.in
+fi
+
+mainmenu_option next_comment
+comment 'SCSI support'
+
+tristate 'SCSI support' CONFIG_SCSI
+
+if [ "$CONFIG_SCSI" != "n" ]; then
+	comment 'SCSI support type (disk, tape, CDrom)'
+
+	dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
+	dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
+	dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
+	if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
+	  bool '  Enable vendor-specific extentions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
+	fi
+	dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
+
+	comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
+
+	bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
+
+	bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
+
+	mainmenu_option next_comment
+	comment 'SCSI low-level drivers'
+
+	bool 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
+	tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
+	endmenu
+fi
+endmenu
+
+if [ "$CONFIG_NET" = "y" ]; then
+	mainmenu_option next_comment
+	comment 'Network device support'
+
+	bool 'Network device support' CONFIG_NETDEVICES
+	if [ "$CONFIG_NETDEVICES" = "y" ]; then
+		tristate 'Dummy net driver support' CONFIG_DUMMY
+		tristate 'PPP (point-to-point) support' CONFIG_PPP
+		if [ ! "$CONFIG_PPP" = "n" ]; then
+		   comment 'CCP compressors for PPP are only built as modules.'
+		fi
+		tristate 'SLIP (serial line) support' CONFIG_SLIP
+		if [ "$CONFIG_SLIP" != "n" ]; then
+		  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
+		  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
+		  bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
+		fi
+		bool 'Sun LANCE support' CONFIG_SUNLANCE
+		tristate 'Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
+		tristate 'Sun QuadEthernet support' CONFIG_SUNQE
+		tristate 'MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
+#		bool 'FDDI driver support' CONFIG_FDDI
+#		if [ "$CONFIG_FDDI" = "y" ]; then
+#		fi
+	fi
+	endmenu
+fi
+
+source fs/Config.in
+
+mainmenu_option next_comment
+comment 'Kernel hacking'
+
+bool 'Kernel profiling support' CONFIG_PROFILE
+if [ "$CONFIG_PROFILE" = "y" ]; then
+	int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
+fi
+endmenu